PartsTable
Technical Data Sheet
PartsTable / O-RING / 5331PL1337217
5331PL1337217 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, outside_diameter: 0.818 INCHES NOMINAL IN, center_hole_diameter: 0.639 INCHES MINIMUM AND 0.649 INCHES MAXIMUM IN, cross-sectional_height: 0.084 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-023-7553, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5331PL1337217
NSN: 5331-00-023-7553
FSC: 5331 — O-RING
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM
outside_diameter0.818 INCHES NOMINAL IN
center_hole_diameter0.639 INCHES MINIMUM AND 0.649 INCHES MAXIMUM IN
cross-sectional_height0.084 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
NSN5331-00-023-7553
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5331PL1337217 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 0.639 INCHES MINIMUM AND 0.649 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 0.818 INCHES NOMINAL IN
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
•
CROSS-SECTIONAL HEIGHT: 0.084 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER0.639 INCHES MINIMUM AND 0.649 INCHES MAXIMUM IN
OUTSIDE DIAMETER0.818 INCHES NOMINAL IN
MATERIALRUBBER FLUOROCARBON CLASS FPM
CROSS-SECTIONAL HEIGHT0.084 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
AS568-908-MIL-G-23652TY2Interchangeable
interchangeable cross-reference
interchangeable
02704Interchangeable
interchangeable cross-reference
interchangeable
AS568-908-MIL-G-23652TY2CPInterchangeable
interchangeable cross-reference
interchangeable
3-8V587-9Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5331PL1337217?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5331PL1337217?
5331PL1337217 is a O-RING.
What parts can replace 5331PL1337217?
There are 4 known substitutes for 5331PL1337217: AS568-908-MIL-G-23652TY2, 02704, AS568-908-MIL-G-23652TY2CP and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5331PL1337217?
5331PL1337217 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-023-7553. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5331PL1337217

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026