PartsTable
Technical Data Sheet
5331PL1279552 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, outside_diameter: 2.506 INCHES NOMINAL IN, center_hole_diameter: 2.290 INCHES MINIMUM AND 2.310 INCHES MAXIMUM IN, elongation_percentage: 250 MAXIMUM, cross-sectional_height: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-618-1657, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5331PL1279552
NSN: 5331-00-618-1657
FSC: 5331 — O-RING
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
hardness_rating70.0 SHORE DUROMETER A NOMINAL
outside_diameter2.506 INCHES NOMINAL IN
center_hole_diameter2.290 INCHES MINIMUM AND 2.310 INCHES MAXIMUM IN
elongation_percentage250 MAXIMUM
cross-sectional_height0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
NSN5331-00-618-1657
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5331PL1279552 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
ELONGATION PERCENTAGE: 250 MAXIMUM
CENTER HOLE DIAMETER: 2.290 INCHES MINIMUM AND 2.310 INCHES MAXIMUM IN
OUTSIDE DIAMETER: 2.506 INCHES NOMINAL IN
HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
ELONGATION PERCENTAGE250 MAXIMUM
CENTER HOLE DIAMETER2.290 INCHES MINIMUM AND 2.310 INCHES MAXIMUM IN
OUTSIDE DIAMETER2.506 INCHES NOMINAL IN
HARDNESS RATING70.0 SHORE DUROMETER A NOMINAL
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
TP360Interchangeable
interchangeable cross-reference
interchangeable
55-109Interchangeable
interchangeable cross-reference
interchangeable
615821Interchangeable
interchangeable cross-reference
interchangeable
237Y9096Interchangeable
interchangeable cross-reference
interchangeable
9N18686Interchangeable
interchangeable cross-reference
interchangeable
49W1-4X1-8Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5331PL1279552?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5331PL1279552?
5331PL1279552 is a O-RING.
What parts can replace 5331PL1279552?
There are 15 known substitutes for 5331PL1279552: TP360, 55-109, 615821 and 12 more. Substitute compatibility should be verified for your specific system.
Is 5331PL1279552 still available?
5331PL1279552 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5331PL1279552