PartsTable
Technical Data Sheet
PartsTable / O-RING / 5331PL1057289
5331PL1057289 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, outside_diameter: 2.980 INCHES MINIMUM AND 3.044 INCHES MAXIMUM IN, center_hole_diameter: 2.719 INCHES MINIMUM AND 2.749 INCHES MAXIMUM IN, cross-sectional_height: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-585-8247, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5331PL1057289
NSN: 5331-00-585-8247
FSC: 5331 — O-RING
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
outside_diameter2.980 INCHES MINIMUM AND 3.044 INCHES MAXIMUM IN
center_hole_diameter2.719 INCHES MINIMUM AND 2.749 INCHES MAXIMUM IN
cross-sectional_height0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
NSN5331-00-585-8247
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5331PL1057289 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
•
CENTER HOLE DIAMETER: 2.719 INCHES MINIMUM AND 2.749 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 2.980 INCHES MINIMUM AND 3.044 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
CENTER HOLE DIAMETER2.719 INCHES MINIMUM AND 2.749 INCHES MAXIMUM IN
OUTSIDE DIAMETER2.980 INCHES MINIMUM AND 3.044 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
6230-10Interchangeable
interchangeable cross-reference
interchangeable
5331PL2228023Interchangeable
interchangeable cross-reference
interchangeable
2-232V0747-75Interchangeable
interchangeable cross-reference
interchangeable
MILR83248Interchangeable
interchangeable cross-reference
interchangeable
AS568-232Interchangeable
interchangeable cross-reference
interchangeable
35010CInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5331PL1057289?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5331PL1057289?
5331PL1057289 is a O-RING.
What parts can replace 5331PL1057289?
There are 27 known substitutes for 5331PL1057289: 6230-10, 5331PL2228023, 2-232V0747-75 and 24 more. Substitute compatibility should be verified for your specific system.
Is 5331PL1057289 still available?
5331PL1057289 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5331PL1057289

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026