PartsTable
Technical Data Sheet
5331PL0977348 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: PLASTIC FLUOROCARBON, center_hole_diameter: 2.234 INCHES NOMINAL IN, cross-sectional_height: 0.139 INCHES NOMINAL IN, departure_from_cited_document: CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D, criticality_code_justification: ZZZW. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-553-2240, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5331PL0977348
NSN: 5331-01-553-2240
FSC: 5331 — O-RING
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
materialPLASTIC FLUOROCARBON
center_hole_diameter2.234 INCHES NOMINAL IN
cross-sectional_height0.139 INCHES NOMINAL IN
departure_from_cited_documentCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
criticality_code_justificationZZZW
NSN5331-01-553-2240
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5331PL0977348 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
CENTER HOLE DIAMETER: 2.234 INCHES NOMINAL IN
DEPARTURE FROM CITED DOCUMENT: CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
MATERIAL: PLASTIC FLUOROCARBON
CRITICALITY CODE JUSTIFICATION: ZZZW
CROSS-SECTIONAL HEIGHT: 0.139 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER2.234 INCHES NOMINAL IN
DEPARTURE FROM CITED DOCUMENTCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
MATERIALPLASTIC FLUOROCARBON
CRITICALITY CODE JUSTIFICATIONZZZW
CROSS-SECTIONAL HEIGHT0.139 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
878228Interchangeable
interchangeable cross-reference
interchangeable
10480932Interchangeable
interchangeable cross-reference
interchangeable
AS568-228MIL-G- 23652 TY 1Interchangeable
interchangeable cross-reference
interchangeable
G547-0002-264382003-052CPInterchangeable
Same NIIN cross-reference
interchangeable
M83248/1-228CPInterchangeable
Same NIIN cross-reference
interchangeable
M83248/1-228Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5331PL0977348?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5331PL0977348?
5331PL0977348 is a O-RING.
What parts can replace 5331PL0977348?
There are 13 known substitutes for 5331PL0977348: 878228, 10480932, AS568-228MIL-G- 23652 TY 1 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5331PL0977348?
5331PL0977348 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-553-2240. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5331PL0977348