PartsTable
Technical Data Sheet
PartsTable / O-RING / 5331PL0899170
5331PL0899170 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SILICONE CLASS Q, outside_diameter: 1.262 INCHES NOMINAL IN, center_hole_diameter: 0.978 INCHES MINIMUM AND 0.990 INCHES MAXIMUM IN, cross-sectional_height: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-618-0490, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5331PL0899170
NSN: 5331-00-618-0490
FSC: 5331 — O-RING
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
materialRUBBER SILICONE CLASS Q
outside_diameter1.262 INCHES NOMINAL IN
center_hole_diameter0.978 INCHES MINIMUM AND 0.990 INCHES MAXIMUM IN
cross-sectional_height0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
NSN5331-00-618-0490
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5331PL0899170 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 0.978 INCHES MINIMUM AND 0.990 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 1.262 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SILICONE CLASS Q
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER0.978 INCHES MINIMUM AND 0.990 INCHES MAXIMUM IN
OUTSIDE DIAMETER1.262 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
MATERIALRUBBER SILICONE CLASS Q
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
AMS3209Interchangeable
interchangeable cross-reference
interchangeable
2-214C873-70Interchangeable
interchangeable cross-reference
interchangeable
2-214C557-7Interchangeable
interchangeable cross-reference
interchangeable
4680-214Interchangeable
interchangeable cross-reference
interchangeable
772-8329001 ITEM NO 2Interchangeable
interchangeable cross-reference
interchangeable
10159954Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5331PL0899170?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5331PL0899170?
5331PL0899170 is a O-RING.
What parts can replace 5331PL0899170?
There are 23 known substitutes for 5331PL0899170: AMS3209, 2-214C873-70, 2-214C557-7 and 20 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5331PL0899170?
5331PL0899170 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-618-0490. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5331PL0899170

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026