PartsTable
Technical Data Sheet
PartsTable / O-RING / 5331PL0795199
5331PL0795199 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER CHLOROPRENE CLASS CR, temp_rating: -60.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, outside_diameter: 2.734 INCHES MINIMUM AND 2.790 INCHES MAXIMUM IN, center_hole_diameter: 2.464 INCHES MINIMUM AND 2.504 INCHES MAXIMUM IN, cross-sectional_height: 0.125 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-606-9841, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5331PL0795199
NSN: 5331-00-606-9841
FSC: 5331 — O-RING
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
materialRUBBER CHLOROPRENE CLASS CR
temp_rating-60.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
hardness_rating70.0 SHORE DUROMETER A NOMINAL
outside_diameter2.734 INCHES MINIMUM AND 2.790 INCHES MAXIMUM IN
center_hole_diameter2.464 INCHES MINIMUM AND 2.504 INCHES MAXIMUM IN
cross-sectional_height0.125 INCHES NOMINAL IN
NSN5331-00-606-9841
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5331PL0795199 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER CHLOROPRENE CLASS CR
•
TEMP RATING: -60.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
•
CENTER HOLE DIAMETER: 2.464 INCHES MINIMUM AND 2.504 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 2.734 INCHES MINIMUM AND 2.790 INCHES MAXIMUM IN
•
HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL
•
CROSS-SECTIONAL HEIGHT: 0.125 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER CHLOROPRENE CLASS CR
TEMP RATING-60.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
CENTER HOLE DIAMETER2.464 INCHES MINIMUM AND 2.504 INCHES MAXIMUM IN
OUTSIDE DIAMETER2.734 INCHES MINIMUM AND 2.790 INCHES MAXIMUM IN
HARDNESS RATING70.0 SHORE DUROMETER A NOMINAL
CROSS-SECTIONAL HEIGHT0.125 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
AS568B-230Interchangeable
interchangeable cross-reference
interchangeable
1H5728Interchangeable
interchangeable cross-reference
interchangeable
F20022K001-8Interchangeable
interchangeable cross-reference
interchangeable
2-230E515-80Interchangeable
interchangeable cross-reference
interchangeable
2-230 E515-8Interchangeable
interchangeable cross-reference
interchangeable
2-230N674-7Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5331PL0795199?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5331PL0795199?
5331PL0795199 is a O-RING.
What parts can replace 5331PL0795199?
There are 19 known substitutes for 5331PL0795199: AS568B-230, 1H5728, F20022K001-8 and 16 more. Substitute compatibility should be verified for your specific system.
Is 5331PL0795199 still available?
5331PL0795199 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5331PL0795199

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026