PartsTable
Technical Data Sheet
PartsTable / O-RING / 5331PL0755680
5331PL0755680 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, outside_diameter: 1.989 INCHES MINIMUM AND 2.035 INCHES MAXIMUM IN, center_hole_diameter: 1.724 INCHES MINIMUM AND 1.744 INCHES MAXIMUM IN, cross-sectional_height: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN, end_item_identification: ARMORED MULTI-PURPOSE VEHICLE (AMPV). This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-641-3407, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5331PL0755680
NSN: 5331-00-641-3407
FSC: 5331 — O-RING
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
materialRUBBER SYNTHETIC
outside_diameter1.989 INCHES MINIMUM AND 2.035 INCHES MAXIMUM IN
center_hole_diameter1.724 INCHES MINIMUM AND 1.744 INCHES MAXIMUM IN
cross-sectional_height0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
end_item_identificationARMORED MULTI-PURPOSE VEHICLE (AMPV)
NSN5331-00-641-3407
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5331PL0755680 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 1.724 INCHES MINIMUM AND 1.744 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SYNTHETIC
•
OUTSIDE DIAMETER: 1.989 INCHES MINIMUM AND 2.035 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER1.724 INCHES MINIMUM AND 1.744 INCHES MAXIMUM IN
MATERIALRUBBER SYNTHETIC
END ITEM IDENTIFICATIONARMORED MULTI-PURPOSE VEHICLE (AMPV)
OUTSIDE DIAMETER1.989 INCHES MINIMUM AND 2.035 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 31
2Q1SZ27Interchangeable
interchangeable cross-reference
interchangeable
BB8807Interchangeable
interchangeable cross-reference
interchangeable
117976Interchangeable
interchangeable cross-reference
interchangeable
8448622Interchangeable
interchangeable cross-reference
interchangeable
62302Interchangeable
interchangeable cross-reference
interchangeable
5657Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5331PL0755680?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5331PL0755680?
5331PL0755680 is a O-RING.
What parts can replace 5331PL0755680?
There are 31 known substitutes for 5331PL0755680: 2Q1SZ27, BB8807, 117976 and 28 more. Substitute compatibility should be verified for your specific system.
Is 5331PL0755680 still available?
5331PL0755680 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5331PL0755680

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026