PartsTable
Technical Data Sheet
PartsTable / O-RING / 5331PL0755604
5331PL0755604 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, temp_rating: -55.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, center_hole_diameter: 0.482 INCHES MINIMUM AND 0.492 INCHES MAXIMUM IN, elongation_percentage: 260 MAXIMUM, cross-sectional_height: 0.093 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-883-3834, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5331PL0755604
NSN: 5331-00-883-3834
FSC: 5331 — O-RING
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
materialRUBBER SYNTHETIC
temp_rating-55.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
hardness_rating70.0 SHORE DUROMETER A NOMINAL
center_hole_diameter0.482 INCHES MINIMUM AND 0.492 INCHES MAXIMUM IN
elongation_percentage260 MAXIMUM
cross-sectional_height0.093 INCHES NOMINAL IN
NSN5331-00-883-3834
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5331PL0755604 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 0.482 INCHES MINIMUM AND 0.492 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.093 INCHES NOMINAL IN
•
HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL
•
ELONGATION PERCENTAGE: 260 MAXIMUM
•
TEMP RATING: -55.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
•
MATERIAL: RUBBER SYNTHETIC
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER0.482 INCHES MINIMUM AND 0.492 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.093 INCHES NOMINAL IN
HARDNESS RATING70.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE260 MAXIMUM
TEMP RATING-55.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
MATERIALRUBBER SYNTHETIC
VERIFIED SUBSTITUTES & CROSS-REFERENCES 29
135650Interchangeable
interchangeable cross-reference
interchangeable
9B6708Interchangeable
interchangeable cross-reference
interchangeable
7156Interchangeable
interchangeable cross-reference
interchangeable
32-14079A10Interchangeable
interchangeable cross-reference
interchangeable
AS568-112Interchangeable
interchangeable cross-reference
interchangeable
ELN210Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5331PL0755604?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5331PL0755604?
5331PL0755604 is a O-RING.
What parts can replace 5331PL0755604?
There are 29 known substitutes for 5331PL0755604: 135650, 9B6708, 7156 and 26 more. Substitute compatibility should be verified for your specific system.
Is 5331PL0755604 still available?
5331PL0755604 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5331PL0755604

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026