PartsTable
Technical Data Sheet
PartsTable / O-RING / 5331PL0669734
5331PL0669734 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, hardness_rating: 75.0 SHORE DUROMETER A NOMINAL, outside_diameter: 1.119 INCHES MINIMUM AND 1.155 INCHES MAXIMUM IN, center_hole_diameter: 0.849 INCHES MINIMUM AND 0.869 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM, cross-sectional_height: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-166-8403, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5331PL0669734
NSN: 5331-00-166-8403
FSC: 5331 — O-RING
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM
hardness_rating75.0 SHORE DUROMETER A NOMINAL
outside_diameter1.119 INCHES MINIMUM AND 1.155 INCHES MAXIMUM IN
center_hole_diameter0.849 INCHES MINIMUM AND 0.869 INCHES MAXIMUM IN
elongation_percentage125 MAXIMUM
cross-sectional_height0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
NSN5331-00-166-8403
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5331PL0669734 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
CENTER HOLE DIAMETER: 0.849 INCHES MINIMUM AND 0.869 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
•
OUTSIDE DIAMETER: 1.119 INCHES MINIMUM AND 1.155 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE125 MAXIMUM
CENTER HOLE DIAMETER0.849 INCHES MINIMUM AND 0.869 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
MATERIALRUBBER FLUOROCARBON CLASS FPM
OUTSIDE DIAMETER1.119 INCHES MINIMUM AND 1.155 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
M83248/1-912Interchangeable
interchangeable cross-reference
interchangeable
516-5486651-F70Interchangeable
interchangeable cross-reference
interchangeable
04052333002424Interchangeable
interchangeable cross-reference
interchangeable
AS3581-212Interchangeable
interchangeable cross-reference
interchangeable
MIL-R-83248/2-212Interchangeable
interchangeable cross-reference
interchangeable
NAS1594-212CPInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5331PL0669734?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5331PL0669734?
5331PL0669734 is a O-RING.
What parts can replace 5331PL0669734?
There are 26 known substitutes for 5331PL0669734: M83248/1-912, 516-5486651-F70, 04052333002424 and 23 more. Substitute compatibility should be verified for your specific system.
Is 5331PL0669734 still available?
5331PL0669734 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5331PL0669734

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026