PartsTable
Technical Data Sheet
5331PL0658525 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, hardness_rating: 75.0 SHORE DUROMETER A NOMINAL, center_hole_diameter: 0.590 INCHES NOMINAL IN, cross-sectional_height: 0.070 INCHES NOMINAL IN, material_document_and_classification: MIL-P-25732 MIL SPEC SINGLE MATERIAL RESPONSE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-314-0818, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5331PL0658525
NSN: 5331-01-314-0818
FSC: 5331 — O-RING
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
hardness_rating75.0 SHORE DUROMETER A NOMINAL
center_hole_diameter0.590 INCHES NOMINAL IN
cross-sectional_height0.070 INCHES NOMINAL IN
material_document_and_classificationMIL-P-25732 MIL SPEC SINGLE MATERIAL RESPONSE
NSN5331-01-314-0818
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5331PL0658525 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
CROSS-SECTIONAL HEIGHT: 0.070 INCHES NOMINAL IN
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
CENTER HOLE DIAMETER: 0.590 INCHES NOMINAL IN
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-P-25732 MIL SPEC SINGLE MATERIAL RESPONSE
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.070 INCHES NOMINAL IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
CENTER HOLE DIAMETER0.590 INCHES NOMINAL IN
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-P-25732 MIL SPEC SINGLE MATERIAL RESPONSE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
518-216-2-505-1Interchangeable
interchangeable cross-reference
interchangeable
216-29505-1Interchangeable
interchangeable cross-reference
interchangeable
26000-1Interchangeable
interchangeable cross-reference
interchangeable
5330PL0797215Interchangeable
interchangeable cross-reference
interchangeable
4330PL1064355Interchangeable
interchangeable cross-reference
interchangeable
SVMPF2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5331PL0658525?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5331PL0658525?
5331PL0658525 is a O-RING.
What parts can replace 5331PL0658525?
There are 7 known substitutes for 5331PL0658525: 518-216-2-505-1, 216-29505-1, 26000-1 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5331PL0658525?
5331PL0658525 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-314-0818. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5331PL0658525