PartsTable
Technical Data Sheet
PartsTable / O-RING / 5331PL0654967
5331PL0654967 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SILICONE CLASS Q, temp_rating: -85.0 FAHRENHEIT AND 500.0 FAHRENHEIT DEGF, hardness_rating: 75.0 SHORE DUROMETER A NOMINAL, outside_diameter: 0.818 INCHES NOMINAL IN, center_hole_diameter: 0.639 INCHES MINIMUM AND 0.649 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-222-1685, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5331PL0654967
NSN: 5331-00-222-1685
FSC: 5331 — O-RING
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
materialRUBBER SILICONE CLASS Q
temp_rating-85.0 FAHRENHEIT AND 500.0 FAHRENHEIT DEGF
hardness_rating75.0 SHORE DUROMETER A NOMINAL
outside_diameter0.818 INCHES NOMINAL IN
center_hole_diameter0.639 INCHES MINIMUM AND 0.649 INCHES MAXIMUM IN
elongation_percentage125 MAXIMUM
cross-sectional_height0.084 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
NSN5331-00-222-1685
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5331PL0654967 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER SILICONE CLASS Q
•
OUTSIDE DIAMETER: 0.818 INCHES NOMINAL IN
•
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL
•
CROSS-SECTIONAL HEIGHT: 0.084 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.639 INCHES MINIMUM AND 0.649 INCHES MAXIMUM IN
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
TEMP RATING: -85.0 FAHRENHEIT AND 500.0 FAHRENHEIT DEGF
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER SILICONE CLASS Q
OUTSIDE DIAMETER0.818 INCHES NOMINAL IN
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL
CROSS-SECTIONAL HEIGHT0.084 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.639 INCHES MINIMUM AND 0.649 INCHES MAXIMUM IN
ELONGATION PERCENTAGE125 MAXIMUM
TEMP RATING-85.0 FAHRENHEIT AND 500.0 FAHRENHEIT DEGF
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
MS9385-05Interchangeable
interchangeable cross-reference
interchangeable
MS9385-06ESInterchangeable
interchangeable cross-reference
interchangeable
MS9385-06Interchangeable
interchangeable cross-reference
interchangeable
MS9385-11Interchangeable
interchangeable cross-reference
interchangeable
SAE-AS9386Interchangeable
interchangeable cross-reference
interchangeable
MS9385-12Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5331PL0654967?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5331PL0654967?
5331PL0654967 is a O-RING.
What parts can replace 5331PL0654967?
There are 23 known substitutes for 5331PL0654967: MS9385-05, MS9385-06ES, MS9385-06 and 20 more. Substitute compatibility should be verified for your specific system.
Is 5331PL0654967 still available?
5331PL0654967 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5331PL0654967

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026