PartsTable
Technical Data Sheet
PartsTable / O-RING / 5331PL0653317
5331PL0653317 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SILICONE CLASS Q, temp_rating: -85.0 FAHRENHEIT AND 500.0 FAHRENHEIT DEGF, hardness_rating: 75.0 SHORE DUROMETER A NOMINAL, outside_diameter: 0.348 INCHES NOMINAL IN, center_hole_diameter: 0.203 INCHES MINIMUM AND 0.213 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-180-9710, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5331PL0653317
NSN: 5331-00-180-9710
FSC: 5331 — O-RING
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
materialRUBBER SILICONE CLASS Q
temp_rating-85.0 FAHRENHEIT AND 500.0 FAHRENHEIT DEGF
hardness_rating75.0 SHORE DUROMETER A NOMINAL
outside_diameter0.348 INCHES NOMINAL IN
center_hole_diameter0.203 INCHES MINIMUM AND 0.213 INCHES MAXIMUM IN
elongation_percentage125 MAXIMUM
cross-sectional_height0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
NSN5331-00-180-9710
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5331PL0653317 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -85.0 FAHRENHEIT AND 500.0 FAHRENHEIT DEGF
•
OUTSIDE DIAMETER: 0.348 INCHES NOMINAL IN
•
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.203 INCHES MINIMUM AND 0.213 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SILICONE CLASS Q
TECHNICAL CHARACTERISTICS (FLIS)
TEMP RATING-85.0 FAHRENHEIT AND 500.0 FAHRENHEIT DEGF
OUTSIDE DIAMETER0.348 INCHES NOMINAL IN
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE125 MAXIMUM
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.203 INCHES MINIMUM AND 0.213 INCHES MAXIMUM IN
MATERIALRUBBER SILICONE CLASS Q
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
1134275-54Interchangeable
interchangeable cross-reference
interchangeable
1149504Interchangeable
interchangeable cross-reference
interchangeable
80613Interchangeable
interchangeable cross-reference
interchangeable
23408Interchangeable
interchangeable cross-reference
interchangeable
6532NCM116192Interchangeable
interchangeable cross-reference
interchangeable
MS9386-009Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5331PL0653317?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5331PL0653317?
5331PL0653317 is a O-RING.
What parts can replace 5331PL0653317?
There are 8 known substitutes for 5331PL0653317: 1134275-54, 1149504, 80613 and 5 more. Substitute compatibility should be verified for your specific system.
Is 5331PL0653317 still available?
5331PL0653317 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5331PL0653317

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026