PartsTable
Technical Data Sheet
PartsTable / MRO / 53315
53315 ✓ Verified by PartsTable
Hama · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CAPACITOR,VARIABLE,AIR DIELECTRI. Key specifications include material: STEEL, design_type: SOLID, end_diameter: 0.3600 INCHES MINIMUM AND 0.3700 INCHES MAXIMUM IN, bore_diameter: 0.2500 INCHES MINIMUM AND 0.2520 INCHES MAXIMUM IN, overall_height: 0.4320 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM IN, special_features: NOT CASEHARDENED;MATL-STEEL MIL-S-6758,COND D. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-085-3895, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 53315
NSN: 5340-00-085-3895
FSC: 5340
CAGE: 02121 — GOODRICH AEROSPACE CANADA LTD (CAN)
SPECIFICATIONS
materialSTEEL
design_typeSOLID
end_diameter0.3600 INCHES MINIMUM AND 0.3700 INCHES MAXIMUM IN
bore_diameter0.2500 INCHES MINIMUM AND 0.2520 INCHES MAXIMUM IN
overall_height0.4320 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM IN
special_featuresNOT CASEHARDENED;MATL-STEEL MIL-S-6758,COND D
first_step_length0.0260 INCHES MINIMUM AND 0.0360 INCHES MAXIMUM IN
surface_treatmentCADMIUM
first_step_diameter0.4950 INCHES MINIMUM AND 0.5050 INCHES MAXIMUM IN
countersink_diameter0.3000 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN
second_step_diameter0.7080 INCHES MINIMUM AND 0.7180 INCHES MAXIMUM IN
end_item_identification5180-01-666-1184
NSN5340-00-085-3895
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 53315 MFR: Hama ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 0.2500 INCHES MINIMUM AND 0.2520 INCHES MAXIMUM IN
•
DESIGN TYPE: SOLID
•
DISTANCE FROM END TO FIRST STEP: 0.3390 INCHES MINIMUM AND 0.3400 INCHES MAXIMUM IN
•
END DIAMETER: 0.3600 INCHES MINIMUM AND 0.3700 INCHES MAXIMUM IN
•
MATERIAL: STEEL
•
COUNTERSINK DIAMETER: 0.3000 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN
•
SURFACE TREATMENT: CADMIUM
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
BORE DIAMETER0.2500 INCHES MINIMUM AND 0.2520 INCHES MAXIMUM IN
DESIGN TYPESOLID
DISTANCE FROM END TO FIRST STEP0.3390 INCHES MINIMUM AND 0.3400 INCHES MAXIMUM IN
END DIAMETER0.3600 INCHES MINIMUM AND 0.3700 INCHES MAXIMUM IN
MATERIALSTEEL
COUNTERSINK DIAMETER0.3000 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN
SPECIAL FEATURESNOT CASEHARDENED;MATL-STEEL MIL-S-6758,COND D
SURFACE TREATMENTCADMIUM
OVERALL HEIGHT0.4320 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM IN
FIRST STEP LENGTH0.0260 INCHES MINIMUM AND 0.0360 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
9434-15-1001Interchangeable
interchangeable cross-reference
interchangeable
53-315Interchangeable
interchangeable cross-reference
interchangeable
650306Interchangeable
interchangeable cross-reference
interchangeable
2186189Interchangeable
interchangeable cross-reference
interchangeable
7Y1720Interchangeable
interchangeable cross-reference
interchangeable
54470 PN/53315Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 53315?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 53315?
53315 is a CAPACITOR,VARIABLE,AIR DIELECTRI manufactured by Hama. It is classified as a MRO (MRO_GENERAL).
What parts can replace 53315?
There are 6 known substitutes for 53315: 9434-15-1001, 53-315, 650306 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 53315?
53315 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-085-3895. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 53315

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026