PartsTable
Technical Data Sheet
PartsTable / O-RING / 5331010733118
5331010733118 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER, center_hole_diameter: 10.340 INCHES NOMINAL IN, cross-sectional_height: 0.103 INCHES NOMINAL IN, end_item_identification: M1A1 TANK. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-073-3118, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5331010733118
NSN: 5331-01-073-3118
FSC: 5331 — O-RING
CAGE: A00AM — E.C.A ETABLISSEMENT CENTRAL DES APPROVISIONNEMENTS DES FORCES ARMEES ROYALES
SPECIFICATIONS
materialRUBBER
center_hole_diameter10.340 INCHES NOMINAL IN
cross-sectional_height0.103 INCHES NOMINAL IN
end_item_identificationM1A1 TANK
NSN5331-01-073-3118
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5331010733118 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 10.340 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.103 INCHES NOMINAL IN
•
MATERIAL: RUBBER
TECHNICAL CHARACTERISTICS (FLIS)
END ITEM IDENTIFICATIONM1A1 TANK
CENTER HOLE DIAMETER10.340 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.103 INCHES NOMINAL IN
MATERIALRUBBER
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
3-1393-20-480Interchangeable
interchangeable cross-reference
interchangeable
L0RA10-480Interchangeable
interchangeable cross-reference
interchangeable
S2329441-10-480Interchangeable
interchangeable cross-reference
interchangeable
9012-03-00072Interchangeable
interchangeable cross-reference
interchangeable
31393Interchangeable
interchangeable cross-reference
interchangeable
A0000465Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5331010733118?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5331010733118?
5331010733118 is a O-RING.
What parts can replace 5331010733118?
There are 14 known substitutes for 5331010733118: 3-1393-20-480, L0RA10-480, S2329441-10-480 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5331010733118?
5331010733118 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-073-3118. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5331010733118

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026