The O-Ring, cataloged under National Stock Number 5331-01-519-0582, is classified within Federal Supply Class 5331 (O-Ring) of the Hardware and Abrasives group. The primary manufacturer of record is Parker-Hannifin Corp Div O-Ring Division. Government technical data includes 6 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 3 commercial cross-references from 3 manufacturers, enabling identification through both NSN and commercial part number lookups. 1 verified substitute exists in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5331-01-519-0582 |
| Primary Part Number | 2-216V884-75 |
| Item Name | O-Ring |
| FSC / FSG | 5331 / 53 — O-Ring |
| Manufacturer | Parker-Hannifin Corp Div O-Ring Division |
| Status | ACTIVE |
| Color | BROWN |
| Material | RUBBER FLUOROCARBON CLASS FPM |
| Center Hole Diameter | 1.097 INCHES MINIMUM AND 1.121 INCHES MAXIMUM IN |
| Temp Rating | -5.0 CELSIUS AND 205.0 CELSIUS DEGC |
| Material Document and Classification | MIL-R-83284, TYPE 1, CLASS 1 MIL SPEC SINGLE MATERIAL RESPONSE |
| Cross-Sectional Height | 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| 2-216V884-75 PRIMARY | Parker-Hannifin Corp Div O-Ring Division (USA) |
| PS250299-30 | Cae Inc (CAN) |
| 5331PL0859955 | Jednolity Indeks Materialowy - Uniform Material Index (POL) |
NSN 5331-01-519-0582 is a O-Ring, manufactured by Parker-Hannifin Corp Div O-Ring Division, classified under FSC 5331 (O-Ring). Status: active.
NSN 5331-01-519-0582 has 3 cross-referenced part numbers: 2-216V884-75 (Parker-Hannifin Corp Div O-Ring Division), PS250299-30 (Cae Inc), 5331PL0859955 (Jednolity Indeks Materialowy - Uniform Material Index).
There is 1 known substitute for 5331-01-519-0582: 5331-00-165-1942. Verify interchangeability with system specifications before substitution.
Key specifications for 2-216V884-75: Color: BROWN; Material: RUBBER FLUOROCARBON CLASS FPM; Center Hole Diameter: 1.097 INCHES MINIMUM AND 1.121 INCHES MAXIMUM IN; Part Name Assigned by Controlling Agency: SEAL, O-RING, FLUOROCARBON, VITON. 8 total characteristics are documented in the Federal Logistics Information System.