The O-Ring, cataloged under National Stock Number 5331-01-485-6456, is classified within Federal Supply Class 5331 (O-ring) of the Hardware and Abrasives group. The manufacturer of record is Parker-Hannifin Corp Div O-Ring Division. Government technical data includes 5 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5331-01-485-6456 |
| Primary Part Number | M83485/1-168 |
| Item Name | O-Ring |
| FSC / FSG | 5331 / 53 — O-ring |
| Manufacturer | Parker-Hannifin Corp Div O-Ring Division |
| Status | ACTIVE |
| Cross-Sectional Height | 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN |
| Hardness Rating | 70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM |
| Material Document and Classification | MIL-R-83451/1 MIL SPEC SINGLE MATERIAL RESPONSE |
| Center Hole Diameter | 7.192 INCHES MINIMUM AND 7.282 INCHES MAXIMUM IN |
| Material | RUBBER FLUOROCARBON CLASS FPM |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| ST1946-168 | Rtx Corporation Dba Pratt & Whitney Div Pratt &whitney (USA) |
| M83485/1-168 PRIMARY | Parker-Hannifin Corp Div O-Ring Division (USA) |
| Reference | Meaning |
|---|---|
| M83485/1-168 | 5/9 Secondary reference Freudenberg-Nok General Partnership Dba International Seal Co Inc |
NSN 5331-01-485-6456 is a O-Ring, manufactured by Parker-Hannifin Corp Div O-Ring Division, classified under FSC 5331, O-ring. Status: active.
NSN 5331-01-485-6456 has 2 manufacturer part numbers on file: ST1946-168 (Rtx Corporation Dba Pratt & Whitney Div Pratt &whitney), M83485/1-168 (Parker-Hannifin Corp Div O-Ring Division).
Key specifications for M83485/1-168: Cross-Sectional Height: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN; Hardness Rating: 70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM; Material Document and Classification: MIL-R-83451/1 MIL SPEC SINGLE MATERIAL RESPONSE; Center Hole Diameter: 7.192 INCHES MINIMUM AND 7.282 INCHES MAXIMUM IN. 5 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.