The O-Ring, cataloged under National Stock Number 5331-01-451-8570, is classified within Federal Supply Class 5331 (O-ring) of the Hardware and Abrasives group. The manufacturer of record is L3 Technologies, Inc. Div L3 Keo. Government technical data includes 4 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5331-01-451-8570 |
| Primary Part Number | 917707 |
| Item Name | O-Ring |
| FSC / FSG | 5331 / 53 — O-ring |
| Manufacturer | L3 Technologies, Inc. Div L3 Keo |
| Status | ACTIVE |
| Cross-Sectional Height | 0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN |
| Material Document and Classification | NAS1613 CLASS 2 ASSN STD SINGLE MATERIAL RESPONSE |
| Center Hole Diameter | 6.202 INCHES MINIMUM AND 6.248 INCHES MAXIMUM IN |
| Material | RUBBER ETHYLENE-PROPYLENE CLASS EPM |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 917707 | L3 Technologies, Inc. Div L3 Keo (USA) |
| Reference | Meaning |
|---|---|
| NAS1611-438 | 5/9 Secondary reference U.S. Government activity |
| NAS1613 | 3/1 Design control — primary reference U.S. Government activity |
| NAS1611-438A | 3/2 Design control — primary reference U.S. Government activity |
NSN 5331-01-451-8570 is a O-Ring, manufactured by L3 Technologies, Inc. Div L3 Keo, classified under FSC 5331, O-ring. Status: active.
NSN 5331-01-451-8570 has 1 manufacturer part number on file: 917707 (L3 Technologies, Inc. Div L3 Keo).
Key specifications for 917707: Cross-Sectional Height: 0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN; Material Document and Classification: NAS1613 CLASS 2 ASSN STD SINGLE MATERIAL RESPONSE; Center Hole Diameter: 6.202 INCHES MINIMUM AND 6.248 INCHES MAXIMUM IN; Material: RUBBER ETHYLENE-PROPYLENE CLASS EPM. 4 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.