The O-Ring, cataloged under National Stock Number 5331-01-421-1829, is classified within Federal Supply Class 5331 (O-ring) of the Hardware and Abrasives group. The manufacturer of record is Mcmaster-Carr Supply Co. Government technical data includes 5 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5331-01-421-1829 |
| Primary Part Number | 9452K58 |
| Item Name | O-Ring |
| FSC / FSG | 5331 / 53 — O-ring |
| Manufacturer | Mcmaster-Carr Supply Co |
| Status | ACTIVE |
| Temp Rating | -35.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF |
| Cross-Sectional Height | 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN |
| Hardness Rating | 65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM |
| Center Hole Diameter | 0.484 INCHES MINIMUM AND 0.494 INCHES MAXIMUM IN |
| Material | RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 9452K58 PRIMARY | Mcmaster-Carr Supply Co (USA) |
| Reference | Meaning |
|---|---|
| 94525K58-014 | 5/9 Secondary reference Mcmaster-Carr Supply Co |
| 94525K58 | 5/9 Secondary reference Mcmaster-Carr Supply Co |
NSN 5331-01-421-1829 is a O-Ring, manufactured by Mcmaster-Carr Supply Co, classified under FSC 5331, O-ring. Status: active.
NSN 5331-01-421-1829 has 1 manufacturer part number on file: 9452K58 (Mcmaster-Carr Supply Co).
Key specifications for 9452K58: Temp Rating: -35.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF; Cross-Sectional Height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN; Hardness Rating: 65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM; Center Hole Diameter: 0.484 INCHES MINIMUM AND 0.494 INCHES MAXIMUM IN. 5 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.