The O-Ring, cataloged under National Stock Number 5331-01-418-9136, is classified within Federal Supply Class 5331 (O-ring) of the Hardware and Abrasives group. The manufacturer of record is Parker-Hannifin Corp Div O-Ring Division. Government technical data includes 4 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5331-01-418-9136 |
| Primary Part Number | 2-332E0603-70 |
| Item Name | O-Ring |
| FSC / FSG | 5331 / 53 — O-ring |
| Manufacturer | Parker-Hannifin Corp Div O-Ring Division |
| Status | ACTIVE |
| Cross-Sectional Height | 0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN |
| Material Document and Classification | MIL-G-22050 MIL SPEC SINGLE MATERIAL RESPONSE |
| Center Hole Diameter | 2.332 INCHES MINIMUM AND 2.368 INCHES MAXIMUM IN |
| Material | RUBBER ETHYLENE-PROPYLENE CLASS EPM |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 2-332E0603-70 | Parker-Hannifin Corp Div O-Ring Division (USA) |
| Reference | Meaning |
|---|---|
| 2-332E688-70 | 5/9 Secondary reference Parker-Hannifin Corp Div O-Ring Division |
| AS568-332 | C/1 Advisory reference — outside the item-of-supply concept Zf Industrieantriebe Witten Gmbh |
| AS568A-332 | 3/9 Design control — primary reference Ralbo Inc |
NSN 5331-01-418-9136 is a O-Ring, manufactured by Parker-Hannifin Corp Div O-Ring Division, classified under FSC 5331, O-ring. Status: active.
NSN 5331-01-418-9136 has 1 manufacturer part number on file: 2-332E0603-70 (Parker-Hannifin Corp Div O-Ring Division).
Key specifications for 2-332E0603-70: Cross-Sectional Height: 0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN; Material Document and Classification: MIL-G-22050 MIL SPEC SINGLE MATERIAL RESPONSE; Center Hole Diameter: 2.332 INCHES MINIMUM AND 2.368 INCHES MAXIMUM IN; Material: RUBBER ETHYLENE-PROPYLENE CLASS EPM. 4 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.