The O-Ring, cataloged under National Stock Number 5331-00-356-1689, is classified within Federal Supply Class 5331 (O-ring) of the Hardware and Abrasives group. Government technical data includes 7 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5331-00-356-1689 |
| Item Name | O-Ring |
| FSC / FSG | 5331 / 53 — O-ring |
| Status | ACTIVE |
| Cross-Sectional Height | 0.094 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN |
| Outside Diameter | 0.949 INCHES NOMINAL IN |
| Criticality Code Justification | ZZZY |
| Center Hole Diameter | 0.746 INCHES MINIMUM AND 0.764 INCHES MAXIMUM IN |
| Test Data Document | 81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Material | RUBBER SILICONE CLASS Q |
| Reference Number Differentiating Characteristics | AS DIFFERENTIATED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS AND CERTIFIED FREE FROM MERCURY CONTAMINATION |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | Y |
| Reference | Meaning |
|---|---|
| AS568-910ZZR765CL2BGR70 | 3/1 Design control — primary reference Sae International Dba Sae International |
| AS568-910ZZR765CL2BGR70 | 3/9 Design control — primary reference U.S. Government activity |
| 1-501-3-910 | 5/1 Secondary reference Tate Andale, Llc |
NSN 5331-00-356-1689 is a O-Ring, classified under FSC 5331, O-ring. Status: active.
Key specifications for 5331-00-356-1689: Cross-Sectional Height: 0.094 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN; Outside Diameter: 0.949 INCHES NOMINAL IN; Criticality Code Justification: ZZZY; Center Hole Diameter: 0.746 INCHES MINIMUM AND 0.764 INCHES MAXIMUM IN. 7 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.