PartsTable
Technical Data Sheet
Download PDF

5330PL2165907 — RETAINER,PACKING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

5330PL2165907: RETAINER,PACKING.

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include material: PLASTIC TETRAFLUOROETHYLENE OVERALL, joint_type: SCARF-PERIPHERAL OVERALL, peripheral_diameter: 0.917 INCHES MINIMUM AND 0.921 INCHES MAXIMUM IN, center_hole_diameter: 0.813 INCHES NOMINAL IN, cross-sectional_height: 0.048 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN, cross-sectional_shape_style: SQUARE/RECTANGULAR. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-334-3661, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5330PL2165907
NSN: 5330-01-334-3661
FSC: 5330 — Packing and Gasket Materials
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
materialPLASTIC TETRAFLUOROETHYLENE OVERALL
joint_typeSCARF-PERIPHERAL OVERALL
peripheral_diameter0.917 INCHES MINIMUM AND 0.921 INCHES MAXIMUM IN
center_hole_diameter0.813 INCHES NOMINAL IN
cross-sectional_height0.048 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
cross-sectional_shape_styleSQUARE/RECTANGULAR
departure_from_cited_documentCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
criticality_code_justificationZZZW
material_document_and_classificationMIL-R-8791/1-019 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-01-334-3661
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5330PL2165907 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.048 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
•
CRITICALITY CODE JUSTIFICATION: ZZZW
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-8791/1-019 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SQUARE/RECTANGULAR
•
DEPARTURE FROM CITED DOCUMENT: CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
•
PERIPHERAL DIAMETER: 0.917 INCHES MINIMUM AND 0.921 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.813 INCHES NOMINAL IN
•
MATERIAL: PLASTIC TETRAFLUOROETHYLENE OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.048 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
CRITICALITY CODE JUSTIFICATIONZZZW
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-8791/1-019 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLESQUARE/RECTANGULAR
DEPARTURE FROM CITED DOCUMENTCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
PERIPHERAL DIAMETER0.917 INCHES MINIMUM AND 0.921 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.813 INCHES NOMINAL IN
MATERIALPLASTIC TETRAFLUOROETHYLENE OVERALL
JOINT TYPESCARF-PERIPHERAL OVERALL
SUBSTITUTES & CROSS-REFERENCES 5
M8791/1-019Reference document
Same NSN cross-reference
Reference document — Secondary reference
SAE-AS8791/1Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
MIL-R-8791/1-019CPSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
MIL-R-8791/1-019Reference document
Same NSN cross-reference
Reference document — Secondary reference
M8791/1-019CPReference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 5330PL2165907?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5330PL2165907?
5330PL2165907 is a RETAINER,PACKING.
What parts can replace 5330PL2165907?
There are 5 known substitutes for 5330PL2165907: M8791/1-019, SAE-AS8791/1, MIL-R-8791/1-019CP and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5330PL2165907?
5330PL2165907 is cataloged in the U.S. Government catalog under NSN 5330-01-334-3661. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5330PL2165907

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.