PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5330PL2079526
5330PL2079526 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include special_features: OVAL GASKET WITH LARGE CIRCULAR CENTER HOLE AND 1 SMALLER MOUNTING HOLE ON EACH SIDE, end_item_identification: REGULATOR FLANGE, SUPERLITE 27 DIVING HELMET, part_name_assigned_by_controlling_agency: GASKET. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-603-6736, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5330PL2079526
NSN: 5330-01-603-6736
FSC: 5330
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
special_featuresOVAL GASKET WITH LARGE CIRCULAR CENTER HOLE AND 1 SMALLER MOUNTING HOLE ON EACH SIDE
end_item_identificationREGULATOR FLANGE, SUPERLITE 27 DIVING HELMET
part_name_assigned_by_controlling_agencyGASKET
NSN5330-01-603-6736
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5330PL2079526 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESOVAL GASKET WITH LARGE CIRCULAR CENTER HOLE AND 1 SMALLER MOUNTING HOLE ON EACH SIDE
END ITEM IDENTIFICATIONREGULATOR FLANGE, SUPERLITE 27 DIVING HELMET
PART NAME ASSIGNED BY CONTROLLING AGENCYGASKET
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
73-107230-1Interchangeable
interchangeable cross-reference
interchangeable
101-T1800AInterchangeable
interchangeable cross-reference
interchangeable
24P100-1Interchangeable
interchangeable cross-reference
interchangeable
51040-1Interchangeable
interchangeable cross-reference
interchangeable
A51040-1Interchangeable
interchangeable cross-reference
interchangeable
99028-30Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5330PL2079526?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5330PL2079526?
5330PL2079526 is a GASKET.
What parts can replace 5330PL2079526?
There are 10 known substitutes for 5330PL2079526: 73-107230-1, 101-T1800A, 24P100-1 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5330PL2079526?
5330PL2079526 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-603-6736. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5330PL2079526

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026