PartsTable
Technical Data Sheet
Download PDF

5330PL1528424 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

5330PL1528424: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include hole_diameter: 0.422 INCHES MINIMUM AND 0.427 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 3.000 INCHES NOMINAL IN, overall_length: 3.250 INCHES NOMINAL IN, aperture_diameter: 0.624 INCHES MINIMUM AND 0.633 INCHES MAXIMUM IN, outside_corner_bevel_length_along_length: 1.000 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-094-2901, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5330PL1528424
NSN: 5330-01-094-2901
FSC: 5330 — Packing and Gasket Materials
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
hole_diameter0.422 INCHES MINIMUM AND 0.427 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
overall_width3.000 INCHES NOMINAL IN
overall_length3.250 INCHES NOMINAL IN
aperture_diameter0.624 INCHES MINIMUM AND 0.633 INCHES MAXIMUM IN
bolt_hole_quantity3
outside_corner_bevel_length_along_length1.000 INCHES NOMINAL IN
NSN5330-01-094-2901
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5330PL1528424 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
APERTURE DIAMETER: 0.624 INCHES MINIMUM AND 0.633 INCHES MAXIMUM IN
•
OUTSIDE CORNER BEVEL LENGTH ALONG LENGTH: 1.000 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 3
•
HOLE DIAMETER: 0.422 INCHES MINIMUM AND 0.427 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS
OVERALL LENGTH3.250 INCHES NOMINAL IN
OVERALL WIDTH3.000 INCHES NOMINAL IN
APERTURE DIAMETER0.624 INCHES MINIMUM AND 0.633 INCHES MAXIMUM IN
OUTSIDE CORNER BEVEL LENGTH ALONG LENGTH1.000 INCHES NOMINAL IN
BOLT HOLE QUANTITY3
HOLE DIAMETER0.422 INCHES MINIMUM AND 0.427 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 5330PL1528424?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5330PL1528424?
5330PL1528424 is a GASKET.
What is the NSN for 5330PL1528424?
5330PL1528424 is cataloged in the U.S. Government catalog under NSN 5330-01-094-2901. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5330PL1528424

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.