PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5330PL1501164
5330PL1501164 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYPROPYLENE OVERALL, special_features: CRITICAL SEALING SURFACE,63 UIN OUTSIDE,32 UIN INSIDE,CROSS-SECTIONAL THICKNESS COUNTERSUNK 30 DEG, rim_surface_width: 0.060 INCHES NOMINAL IN, peripheral_diameter: 3.438 INCHES MINIMUM AND 3.453 INCHES MAXIMUM IN, center_hole_diameter: 3.138 INCHES MINIMUM AND 3.143 INCHES MAXIMUM IN, cross-sectional_height: 0.430 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-052-6417, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5330PL1501164
NSN: 5330-01-052-6417
FSC: 5330
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
materialPLASTIC POLYPROPYLENE OVERALL
special_featuresCRITICAL SEALING SURFACE,63 UIN OUTSIDE,32 UIN INSIDE,CROSS-SECTIONAL THICKNESS COUNTERSUNK 30 DEG
rim_surface_width0.060 INCHES NOMINAL IN
peripheral_diameter3.438 INCHES MINIMUM AND 3.453 INCHES MAXIMUM IN
center_hole_diameter3.138 INCHES MINIMUM AND 3.143 INCHES MAXIMUM IN
cross-sectional_height0.430 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN
cross-sectional_thickness0.009 INCHES MINIMUM AND 0.011 INCHES MAXIMUM IN
cross-sectional_shape_styleFLANGE
NSN5330-01-052-6417
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5330PL1501164 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: PLASTIC POLYPROPYLENE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: FLANGE
•
CROSS-SECTIONAL THICKNESS: 0.009 INCHES MINIMUM AND 0.011 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.430 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN
•
PERIPHERAL DIAMETER: 3.438 INCHES MINIMUM AND 3.453 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 3.138 INCHES MINIMUM AND 3.143 INCHES MAXIMUM IN
•
RIM SURFACE WIDTH: 0.060 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALPLASTIC POLYPROPYLENE OVERALL
CROSS-SECTIONAL SHAPE STYLEFLANGE
CROSS-SECTIONAL THICKNESS0.009 INCHES MINIMUM AND 0.011 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.430 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN
PERIPHERAL DIAMETER3.438 INCHES MINIMUM AND 3.453 INCHES MAXIMUM IN
CENTER HOLE DIAMETER3.138 INCHES MINIMUM AND 3.143 INCHES MAXIMUM IN
RIM SURFACE WIDTH0.060 INCHES NOMINAL IN
SPECIAL FEATURESCRITICAL SEALING SURFACE,63 UIN OUTSIDE,32 UIN INSIDE,CROSS-SECTIONAL THICKNESS COUNTERSUNK 30 DEG
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
2495500-71Interchangeable
interchangeable cross-reference
interchangeable
302-04200Interchangeable
interchangeable cross-reference
interchangeable
416754-109Interchangeable
interchangeable cross-reference
interchangeable
202822Interchangeable
interchangeable cross-reference
interchangeable
02-2192Interchangeable
interchangeable cross-reference
interchangeable
202.822Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5330PL1501164?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5330PL1501164?
5330PL1501164 is a PACKING,PREFORMED.
What parts can replace 5330PL1501164?
There are 7 known substitutes for 5330PL1501164: 2495500-71, 302-04200, 416754-109 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5330PL1501164?
5330PL1501164 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-052-6417. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5330PL1501164

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026