PartsTable
Technical Data Sheet
Download PDF

5330PL1276726 — PACKING,PREFORMED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

5330PL1276726: PACKING,PREFORMED.

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, peripheral_diameter: 0.791 INCHES NOMINAL IN, center_hole_diameter: 0.347 INCHES NOMINAL IN, cross-sectional_height: 0.188 INCHES NOMINAL IN, material_document_and_classification: 9250 FSCM 05262 MFR REF SINGLE MATERIAL RESPONSE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-612-3652, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5330PL1276726
NSN: 5330-00-612-3652
FSC: 5330 — Packing and Gasket Materials
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
peripheral_diameter0.791 INCHES NOMINAL IN
center_hole_diameter0.347 INCHES NOMINAL IN
cross-sectional_height0.188 INCHES NOMINAL IN
cross-sectional_shape_styleU
material_document_and_classification9250 FSCM 05262 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-612-3652
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5330PL1276726 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.188 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: 9250 FSCM 05262 MFR REF SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: U
•
PERIPHERAL DIAMETER: 0.791 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 0.347 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.188 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATION9250 FSCM 05262 MFR REF SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLEU
PERIPHERAL DIAMETER0.791 INCHES NOMINAL IN
CENTER HOLE DIAMETER0.347 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC OVERALL
SUBSTITUTES & CROSS-REFERENCES 3
005-027Reference document
Same NSN cross-reference
Reference document — Secondary reference
8030-2Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
7657-2PC9Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 5330PL1276726?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5330PL1276726?
5330PL1276726 is a PACKING,PREFORMED.
What parts can replace 5330PL1276726?
There are 3 known substitutes for 5330PL1276726: 005-027, 8030-2, 7657-2PC9. Substitute compatibility should be verified for your specific system.
What is the NSN for 5330PL1276726?
5330PL1276726 is cataloged in the U.S. Government catalog under NSN 5330-00-612-3652. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5330PL1276726