PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5330PL1251347
5330PL1251347 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303 OVERALL, peripheral_diameter: 0.355 INCHES MINIMUM AND 0.358 INCHES MAXIMUM IN, center_hole_diameter: 0.260 INCHES MINIMUM AND 0.263 INCHES MAXIMUM IN, cross-sectional_height: 0.080 INCHES NOMINAL IN, cross-sectional_shape_style: OVAL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-035-0958, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5330PL1251347
NSN: 5330-01-035-0958
FSC: 5330
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
materialSTEEL COMP 303 OVERALL
peripheral_diameter0.355 INCHES MINIMUM AND 0.358 INCHES MAXIMUM IN
center_hole_diameter0.260 INCHES MINIMUM AND 0.263 INCHES MAXIMUM IN
cross-sectional_height0.080 INCHES NOMINAL IN
cross-sectional_shape_styleOVAL
NSN5330-01-035-0958
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5330PL1251347 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PERIPHERAL DIAMETER: 0.355 INCHES MINIMUM AND 0.358 INCHES MAXIMUM IN
•
MATERIAL: STEEL COMP 303 OVERALL
•
CENTER HOLE DIAMETER: 0.260 INCHES MINIMUM AND 0.263 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: OVAL
•
CROSS-SECTIONAL HEIGHT: 0.080 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
PERIPHERAL DIAMETER0.355 INCHES MINIMUM AND 0.358 INCHES MAXIMUM IN
MATERIALSTEEL COMP 303 OVERALL
CENTER HOLE DIAMETER0.260 INCHES MINIMUM AND 0.263 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLEOVAL
CROSS-SECTIONAL HEIGHT0.080 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
78018Interchangeable
interchangeable cross-reference
interchangeable
3-1409CPC52Interchangeable
interchangeable cross-reference
interchangeable
3-1569BPC52Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5330PL1251347?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5330PL1251347?
5330PL1251347 is a RETAINER,PACKING.
What parts can replace 5330PL1251347?
There are 3 known substitutes for 5330PL1251347: 78018, 3-1409CPC52, 3-1569BPC52. Substitute compatibility should be verified for your specific system.
What is the NSN for 5330PL1251347?
5330PL1251347 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-035-0958. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5330PL1251347

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026