PartsTable
Technical Data Sheet
Download PDF

5330PL1149685 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

5330PL1149685: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include hardness_rating: 55.0 SHORE DUROMETER A MINIMUM AND 65.0 SHORE DUROMETER A MAXIMUM OVERALL, outside_diameter: 1.310 INCHES NOMINAL IN, aperture_diameter: 1.030 INCHES NOMINAL IN, cross-sectional_thickness: 0.090 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-146-7182, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5330PL1149685
NSN: 5330-01-146-7182
FSC: 5330 — Packing and Gasket Materials
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
hardness_rating55.0 SHORE DUROMETER A MINIMUM AND 65.0 SHORE DUROMETER A MAXIMUM OVERALL
outside_diameter1.310 INCHES NOMINAL IN
aperture_diameter1.030 INCHES NOMINAL IN
cross-sectional_thickness0.090 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
NSN5330-01-146-7182
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5330PL1149685 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.090 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
•
HARDNESS RATING: 55.0 SHORE DUROMETER A MINIMUM AND 65.0 SHORE DUROMETER A MAXIMUM OVERALL
•
OUTSIDE DIAMETER: 1.310 INCHES NOMINAL IN
•
APERTURE DIAMETER: 1.030 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.090 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
HARDNESS RATING55.0 SHORE DUROMETER A MINIMUM AND 65.0 SHORE DUROMETER A MAXIMUM OVERALL
OUTSIDE DIAMETER1.310 INCHES NOMINAL IN
APERTURE DIAMETER1.030 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 3
TA356-51Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
4229775Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
350051Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedAcquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 5330PL1149685?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5330PL1149685?
5330PL1149685 is a GASKET.
What parts can replace 5330PL1149685?
There are 3 known substitutes for 5330PL1149685: TA356-51, 4229775, 350051. Substitute compatibility should be verified for your specific system.
What is the NSN for 5330PL1149685?
5330PL1149685 is cataloged in the U.S. Government catalog under NSN 5330-01-146-7182. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5330PL1149685

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.