PartsTable
Technical Data Sheet
Download PDF

5330PL1029385 — SLEEVE,SEAL,COUPLER

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

5330PL1029385: SLEEVE,SEAL,COUPLER.

The SLEEVE,SEAL,COUPLER is a the manufacturer industrial component. Key specifications include material: COTTON AND GLASS AND RUBBER SYNTHETIC OVERALL, recess_length: 0.876 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN, recess_diameter: 5.125 INCHES MINIMUM AND 5.145 INCHES MAXIMUM IN, cross-sectional_length: 1.5000 INCHES MINIMUM AND 1.6250 INCHES MAXIMUM IN, raised_diameter_length: 1.079 INCHES MINIMUM AND 1.125 INCHES MAXIMUM IN, cross-sectional_shape_style: SPHERICAL INSIDE RECESSED. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-582-0472, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5330PL1029385
NSN: 5330-00-582-0472
FSC: 5330 — Packing and Gasket Materials
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
materialCOTTON AND GLASS AND RUBBER SYNTHETIC OVERALL
recess_length0.876 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
recess_diameter5.125 INCHES MINIMUM AND 5.145 INCHES MAXIMUM IN
cross-sectional_length1.5000 INCHES MINIMUM AND 1.6250 INCHES MAXIMUM IN
raised_diameter_length1.079 INCHES MINIMUM AND 1.125 INCHES MAXIMUM IN
cross-sectional_shape_styleSPHERICAL INSIDE RECESSED
cross_section_inside_diameter5.016 INCHES MINIMUM AND 5.036 INCHES MAXIMUM IN
cross_section_outside_diameter5.406 INCHES MINIMUM AND 5.436 INCHES MAXIMUM IN
NSN5330-00-582-0472
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5330PL1029385 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RAISED DIAMETER LENGTH: 1.079 INCHES MINIMUM AND 1.125 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: SPHERICAL INSIDE RECESSED
•
CROSS-SECTIONAL LENGTH: 1.5000 INCHES MINIMUM AND 1.6250 INCHES MAXIMUM IN
•
CROSS SECTION INSIDE DIAMETER: 5.016 INCHES MINIMUM AND 5.036 INCHES MAXIMUM IN
•
RECESS LENGTH: 0.876 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
•
RECESS DIAMETER: 5.125 INCHES MINIMUM AND 5.145 INCHES MAXIMUM IN
•
CROSS SECTION OUTSIDE DIAMETER: 5.406 INCHES MINIMUM AND 5.436 INCHES MAXIMUM IN
•
MATERIAL: COTTON AND GLASS AND RUBBER SYNTHETIC OVERALL
TECHNICAL CHARACTERISTICS
RAISED DIAMETER LENGTH1.079 INCHES MINIMUM AND 1.125 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLESPHERICAL INSIDE RECESSED
CROSS-SECTIONAL LENGTH1.5000 INCHES MINIMUM AND 1.6250 INCHES MAXIMUM IN
CROSS SECTION INSIDE DIAMETER5.016 INCHES MINIMUM AND 5.036 INCHES MAXIMUM IN
RECESS LENGTH0.876 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
RECESS DIAMETER5.125 INCHES MINIMUM AND 5.145 INCHES MAXIMUM IN
CROSS SECTION OUTSIDE DIAMETER5.406 INCHES MINIMUM AND 5.436 INCHES MAXIMUM IN
MATERIALCOTTON AND GLASS AND RUBBER SYNTHETIC OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
STSMU010H0500Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
SS4-500Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 5330PL1029385?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5330PL1029385?
5330PL1029385 is a SLEEVE,SEAL,COUPLER.
What parts can replace 5330PL1029385?
There are 2 known substitutes for 5330PL1029385: STSMU010H0500, SS4-500. Substitute compatibility should be verified for your specific system.
What is the NSN for 5330PL1029385?
5330PL1029385 is cataloged in the U.S. Government catalog under NSN 5330-00-582-0472. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5330PL1029385

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.