PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5330PL0938449
5330PL0938449 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include hole_diameter: 0.188 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 3.250 INCHES NOMINAL IN, overall_length: 4.000 INCHES NOMINAL IN, outside_corner_radius: 0.312 INCHES NOMINAL IN, center_to_center_distance_between_bolt_holes_along_width: 2.625 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, center_to_center_distance_between_bolt_holes_along_length: 3.375 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-081-9386, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5330PL0938449
NSN: 5330-00-081-9386
FSC: 5330
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
hole_diameter0.188 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width3.250 INCHES NOMINAL IN
overall_length4.000 INCHES NOMINAL IN
outside_corner_radius0.312 INCHES NOMINAL IN
center_to_center_distance_between_bolt_holes_along_width2.625 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
center_to_center_distance_between_bolt_holes_along_length3.375 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
NSN5330-00-081-9386
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5330PL0938449 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH: 2.625 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
HOLE DIAMETER: 0.188 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 3.375 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
OUTSIDE CORNER RADIUS: 0.312 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH2.625 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
HOLE DIAMETER0.188 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OVERALL WIDTH3.250 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH3.375 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OUTSIDE CORNER RADIUS0.312 INCHES NOMINAL IN
OVERALL LENGTH4.000 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
F5569Interchangeable
interchangeable cross-reference
interchangeable
3750Interchangeable
interchangeable cross-reference
interchangeable
335Interchangeable
interchangeable cross-reference
interchangeable
C-F-206 TY1CP16R3Interchangeable
interchangeable cross-reference
interchangeable
C-F-206Interchangeable
interchangeable cross-reference
interchangeable
C-F-206 TY1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5330PL0938449?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5330PL0938449?
5330PL0938449 is a GASKET.
What parts can replace 5330PL0938449?
There are 13 known substitutes for 5330PL0938449: F5569, 3750, 335 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5330PL0938449?
5330PL0938449 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-081-9386. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5330PL0938449

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026