PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5330PL0892839
5330PL0892839 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY OVERALL, hole_diameter: 0.190 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 1.093 INCHES NOMINAL IN, overall_length: 1.093 INCHES NOMINAL IN, cross-sectional_shape_style: METAL AND SYNTHETIC RUBBER, outside_corner_inverted_radius: 0.080 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-651-0489, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5330PL0892839
NSN: 5330-00-651-0489
FSC: 5330
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
materialALUMINUM ALLOY OVERALL
hole_diameter0.190 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width1.093 INCHES NOMINAL IN
overall_length1.093 INCHES NOMINAL IN
cross-sectional_shape_styleMETAL AND SYNTHETIC RUBBER
outside_corner_inverted_radius0.080 INCHES NOMINAL IN
outside_edge_to_bolt_hole_center_distance_along_width0.140 INCHES NOMINAL IN
outside_edge_to_bolt_hole_center_distance_along_length0.140 INCHES NOMINAL IN
center_to_center_distance_between_bolt_holes_along_width0.813 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
center_to_center_distance_between_bolt_holes_along_length0.813 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
NSN5330-00-651-0489
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5330PL0892839 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE CORNER INVERTED RADIUS: 0.080 INCHES NOMINAL IN
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH: 0.140 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: METAL AND SYNTHETIC RUBBER
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 0.813 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
HOLE DIAMETER: 0.190 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
MATERIAL: ALUMINUM ALLOY OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE CORNER INVERTED RADIUS0.080 INCHES NOMINAL IN
OVERALL WIDTH1.093 INCHES NOMINAL IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH0.140 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEMETAL AND SYNTHETIC RUBBER
OVERALL LENGTH1.093 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH0.813 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
HOLE DIAMETER0.190 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
MATERIALALUMINUM ALLOY OVERALL
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH0.140 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH0.813 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
ZZ-I-550/GROUP6/11.2-24/ONCENTERInterchangeable
interchangeable cross-reference
interchangeable
519573Interchangeable
interchangeable cross-reference
interchangeable
519572Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5330PL0892839?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5330PL0892839?
5330PL0892839 is a GASKET.
What parts can replace 5330PL0892839?
There are 3 known substitutes for 5330PL0892839: ZZ-I-550/GROUP6/11.2-24/ONCENTER, 519573, 519572. Substitute compatibility should be verified for your specific system.
What is the NSN for 5330PL0892839?
5330PL0892839 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-651-0489. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5330PL0892839

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026