PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5330PL0892547
5330PL0892547 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include angle: 25.0 DEGREES MINIMUM AND 35.0 DEGREES MAXIMUM, material: PLASTIC POLYTETRAFLUOROETHYLENE OVERALL, joint_type: SCARF-BUTT RETAINER, peripheral_diameter: 1.492 INCHES NOMINAL IN, center_hole_diameter: 1.250 INCHES NOMINAL IN, distance_between_ends: 0.047 INCHES MINIMUM AND 0.093 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-226-0134, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5330PL0892547
NSN: 5330-01-226-0134
FSC: 5330
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
angle25.0 DEGREES MINIMUM AND 35.0 DEGREES MAXIMUM
materialPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
joint_typeSCARF-BUTT RETAINER
peripheral_diameter1.492 INCHES NOMINAL IN
center_hole_diameter1.250 INCHES NOMINAL IN
distance_between_ends0.047 INCHES MINIMUM AND 0.093 INCHES MAXIMUM IN
cross-sectional_thickness0.025 INCHES MINIMUM AND 0.029 INCHES MAXIMUM IN
cross-sectional_shape_styleSQUARE
criticality_code_justificationZZZY
reference_number_differentiating_characteristicsCLEANED IN ACCORDANCE WITH MIL-C-52211
NSN5330-01-226-0134
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5330PL0892547 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.025 INCHES MINIMUM AND 0.029 INCHES MAXIMUM IN
•
MATERIAL: PLASTIC POLYTETRAFLUOROETHYLENE OVERALL
•
ANGLE: 25.0 DEGREES MINIMUM AND 35.0 DEGREES MAXIMUM
•
JOINT TYPE: SCARF-BUTT RETAINER
•
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: CLEANED IN ACCORDANCE WITH MIL-C-52211
•
DISTANCE BETWEEN ENDS: 0.047 INCHES MINIMUM AND 0.093 INCHES MAXIMUM IN
•
PERIPHERAL DIAMETER: 1.492 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 1.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL THICKNESS0.025 INCHES MINIMUM AND 0.029 INCHES MAXIMUM IN
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
ANGLE25.0 DEGREES MINIMUM AND 35.0 DEGREES MAXIMUM
JOINT TYPESCARF-BUTT RETAINER
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICSCLEANED IN ACCORDANCE WITH MIL-C-52211
DISTANCE BETWEEN ENDS0.047 INCHES MINIMUM AND 0.093 INCHES MAXIMUM IN
PERIPHERAL DIAMETER1.492 INCHES NOMINAL IN
CENTER HOLE DIAMETER1.250 INCHES NOMINAL IN
CRITICALITY CODE JUSTIFICATIONZZZY
CROSS-SECTIONAL SHAPE STYLESQUARE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
5330001716758Interchangeable
interchangeable cross-reference
interchangeable
25704-281300.09.0Interchangeable
interchangeable cross-reference
interchangeable
255552PC34Interchangeable
interchangeable cross-reference
interchangeable
4824-3279069PC37Interchangeable
interchangeable cross-reference
interchangeable
MS28782Interchangeable
interchangeable cross-reference
interchangeable
4809-F, PC 38Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5330PL0892547?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5330PL0892547?
5330PL0892547 is a PACKING,PREFORMED.
What parts can replace 5330PL0892547?
There are 8 known substitutes for 5330PL0892547: 5330001716758, 25704-281300.09.0, 255552PC34 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5330PL0892547?
5330PL0892547 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-226-0134. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5330PL0892547

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026