PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5330PL0862594
5330PL0862594 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: PAPER AND GLUE AND GLYCERIN OR PAPER AND RUBBER SYNTHETIC OVERALL, hole_diameter: 0.256 INCHES MINIMUM AND 0.276 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, outside_diameter: 7.490 INCHES MINIMUM AND 7.510 INCHES MAXIMUM IN, style_designator: CIRCULAR, aperture_diameter: 6.410 INCHES MINIMUM AND 6.430 INCHES MAXIMUM IN, bolt_hole_quantity: 10. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-306-7887, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5330PL0862594
NSN: 5330-01-306-7887
FSC: 5330
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
materialPAPER AND GLUE AND GLYCERIN OR PAPER AND RUBBER SYNTHETIC OVERALL
hole_diameter0.256 INCHES MINIMUM AND 0.276 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
outside_diameter7.490 INCHES MINIMUM AND 7.510 INCHES MAXIMUM IN
style_designatorCIRCULAR
aperture_diameter6.410 INCHES MINIMUM AND 6.430 INCHES MAXIMUM IN
bolt_hole_quantity10
bolt_circle_diameter7.000 INCHES NOMINAL IN
cross-sectional_thickness0.013 INCHES MINIMUM AND 0.017 INCHES MAXIMUM IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationHH-P-96,TY 1 AND 2 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-01-306-7887
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5330PL0862594 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 7.490 INCHES MINIMUM AND 7.510 INCHES MAXIMUM IN
•
CROSS-SECTIONAL THICKNESS: 0.013 INCHES MINIMUM AND 0.017 INCHES MAXIMUM IN
•
BOLT HOLE QUANTITY: 10
•
BOLT CIRCLE DIAMETER: 7.000 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: HH-P-96,TY 1 AND 2 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
APERTURE DIAMETER: 6.410 INCHES MINIMUM AND 6.430 INCHES MAXIMUM IN
•
HOLE DIAMETER: 0.256 INCHES MINIMUM AND 0.276 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
•
MATERIAL: PAPER AND GLUE AND GLYCERIN OR PAPER AND RUBBER SYNTHETIC OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER7.490 INCHES MINIMUM AND 7.510 INCHES MAXIMUM IN
CROSS-SECTIONAL THICKNESS0.013 INCHES MINIMUM AND 0.017 INCHES MAXIMUM IN
BOLT HOLE QUANTITY10
BOLT CIRCLE DIAMETER7.000 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONHH-P-96,TY 1 AND 2 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
APERTURE DIAMETER6.410 INCHES MINIMUM AND 6.430 INCHES MAXIMUM IN
HOLE DIAMETER0.256 INCHES MINIMUM AND 0.276 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
MATERIALPAPER AND GLUE AND GLYCERIN OR PAPER AND RUBBER SYNTHETIC OVERALL
STYLE DESIGNATORCIRCULAR
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
BACB30AN6-4Interchangeable
interchangeable cross-reference
interchangeable
1496-4Interchangeable
interchangeable cross-reference
interchangeable
NAS1496-4Interchangeable
interchangeable cross-reference
interchangeable
14451Interchangeable
interchangeable cross-reference
interchangeable
14964PC3Interchangeable
interchangeable cross-reference
interchangeable
1WD3-127-1M0NELInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5330PL0862594?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5330PL0862594?
5330PL0862594 is a GASKET.
What parts can replace 5330PL0862594?
There are 10 known substitutes for 5330PL0862594: BACB30AN6-4, 1496-4, NAS1496-4 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5330PL0862594?
5330PL0862594 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-306-7887. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5330PL0862594

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026