PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5330PL0815941
5330PL0815941 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include hole_diameter: 0.250 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 12.120 INCHES NOMINAL IN, aperture_width: 10.620 INCHES NOMINAL IN, overall_length: 20.440 INCHES NOMINAL IN, aperture_length: 17.990 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-656-2536, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5330PL0815941
NSN: 5330-00-656-2536
FSC: 5330
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
hole_diameter0.250 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width12.120 INCHES NOMINAL IN
aperture_width10.620 INCHES NOMINAL IN
overall_length20.440 INCHES NOMINAL IN
aperture_length17.990 INCHES NOMINAL IN
NSN5330-00-656-2536
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5330PL0815941 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
APERTURE WIDTH: 10.620 INCHES NOMINAL IN
•
APERTURE LENGTH: 17.990 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.250 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL LENGTH20.440 INCHES NOMINAL IN
APERTURE WIDTH10.620 INCHES NOMINAL IN
APERTURE LENGTH17.990 INCHES NOMINAL IN
HOLE DIAMETER0.250 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OVERALL WIDTH12.120 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
82405Interchangeable
interchangeable cross-reference
interchangeable
64A130A87Interchangeable
interchangeable cross-reference
interchangeable
367BInterchangeable
interchangeable cross-reference
interchangeable
82405-01Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5330PL0815941?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5330PL0815941?
5330PL0815941 is a GASKET.
What parts can replace 5330PL0815941?
There are 4 known substitutes for 5330PL0815941: 82405, 64A130A87, 367B and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5330PL0815941?
5330PL0815941 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-656-2536. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5330PL0815941

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026