PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5330PL0811862
5330PL0811862 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: PAPER AND GLUE OVERALL, hole_diameter: 0.281 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 2.344 INCHES NOMINAL IN, aperture_diameter: 1.500 INCHES NOMINAL IN, bolt_circle_diameter: 2.000 INCHES NOMINAL IN, outside_corner_radius: 0.281 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-889-2167, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5330PL0811862
NSN: 5330-00-889-2167
FSC: 5330
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
materialPAPER AND GLUE OVERALL
hole_diameter0.281 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width2.344 INCHES NOMINAL IN
aperture_diameter1.500 INCHES NOMINAL IN
bolt_circle_diameter2.000 INCHES NOMINAL IN
outside_corner_radius0.281 INCHES NOMINAL IN
cross-sectional_thickness0.010 INCHES MINIMUM AND 0.012 INCHES MAXIMUM IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
side_radius_from_gasket_center1.062 INCHES NOMINAL IN
material_document_and_classificationMIL-G-12803,NO. +3313-B MIL SPEC ALL MATERIAL RESPONSES OVERALL
NSN5330-00-889-2167
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5330PL0811862 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE CORNER RADIUS: 0.281 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-12803,NO. +3313-B MIL SPEC ALL MATERIAL RESPONSES OVERALL
•
SIDE RADIUS FROM GASKET CENTER: 1.062 INCHES NOMINAL IN
•
BOLT CIRCLE DIAMETER: 2.000 INCHES NOMINAL IN
•
APERTURE DIAMETER: 1.500 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.010 INCHES MINIMUM AND 0.012 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
HOLE DIAMETER: 0.281 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE CORNER RADIUS0.281 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-12803,NO. +3313-B MIL SPEC ALL MATERIAL RESPONSES OVERALL
SIDE RADIUS FROM GASKET CENTER1.062 INCHES NOMINAL IN
BOLT CIRCLE DIAMETER2.000 INCHES NOMINAL IN
APERTURE DIAMETER1.500 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.010 INCHES MINIMUM AND 0.012 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
HOLE DIAMETER0.281 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OVERALL WIDTH2.344 INCHES NOMINAL IN
MATERIALPAPER AND GLUE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
7114Interchangeable
interchangeable cross-reference
interchangeable
GS179M5Interchangeable
interchangeable cross-reference
interchangeable
8575-23-2Interchangeable
interchangeable cross-reference
interchangeable
026-08103Interchangeable
interchangeable cross-reference
interchangeable
40602Interchangeable
interchangeable cross-reference
interchangeable
071142Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5330PL0811862?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5330PL0811862?
5330PL0811862 is a GASKET.
What parts can replace 5330PL0811862?
There are 11 known substitutes for 5330PL0811862: 7114, GS179M5, 8575-23-2 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5330PL0811862?
5330PL0811862 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-889-2167. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5330PL0811862

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026