PartsTable
Technical Data Sheet
Download PDF

5330PL0796801 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

5330PL0796801: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: CELLULOSE AND RUBBER OR PAPER AND RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL, hole_diameter: 0.210 INCHES MINIMUM AND 0.230 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 1.540 INCHES MINIMUM AND 1.580 INCHES MAXIMUM IN, overall_length: 3.310 INCHES MINIMUM AND 3.350 INCHES MAXIMUM IN, inside_corner_radius: 0.100 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN, cross-sectional_thickness: 0.031 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-252-0624, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5330PL0796801
NSN: 5330-01-252-0624
FSC: 5330 — Packing and Gasket Materials
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
materialCELLULOSE AND RUBBER OR PAPER AND RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL
hole_diameter0.210 INCHES MINIMUM AND 0.230 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
overall_width1.540 INCHES MINIMUM AND 1.580 INCHES MAXIMUM IN
overall_length3.310 INCHES MINIMUM AND 3.350 INCHES MAXIMUM IN
bolt_hole_quantity4
inside_corner_radius0.100 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
cross-sectional_thickness0.031 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationNICOTE,CAGEC 79144 MFR REF 2ND MATERIAL RESPONSE OVERALL
outside_corner_bevel_length_along_width0.480 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
outside_corner_bevel_length_along_length0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN
outside_edge_to_bolt_hole_center_distance_along_length0.230 INCHES NOMINAL IN
NSN5330-01-252-0624
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5330PL0796801 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
•
INSIDE CORNER RADIUS: 0.100 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: NICOTE,CAGEC 79144 MFR REF 2ND MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH: 0.480 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
•
OUTSIDE CORNER BEVEL LENGTH ALONG LENGTH: 0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
INSIDE CORNER RADIUS0.100 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONNICOTE,CAGEC 79144 MFR REF 2ND MATERIAL RESPONSE OVERALL
OVERALL LENGTH3.310 INCHES MINIMUM AND 3.350 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH1.540 INCHES MINIMUM AND 1.580 INCHES MAXIMUM IN
OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH0.480 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
OUTSIDE CORNER BEVEL LENGTH ALONG LENGTH0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN
BOLT HOLE QUANTITY4
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH2.400 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 1
10326620Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedAcquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 5330PL0796801?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5330PL0796801?
5330PL0796801 is a GASKET.
What parts can replace 5330PL0796801?
There is 1 known substitute for 5330PL0796801: 10326620. Substitute compatibility should be verified for your specific system.
What is the NSN for 5330PL0796801?
5330PL0796801 is cataloged in the U.S. Government catalog under NSN 5330-01-252-0624. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5330PL0796801

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.