PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5330PL0702415
5330PL0702415 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT A, case_style: RECESSED, seal_width: 0.906 INCHES NOMINAL IN, temp_rating: -65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF, outside_diameter: 6.629 INCHES NOMINAL IN, surface_treatment: PLASTIC CASE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-092-1007, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5330PL0702415
NSN: 5330-01-092-1007
FSC: 5330
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT A
case_styleRECESSED
seal_width0.906 INCHES NOMINAL IN
temp_rating-65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
outside_diameter6.629 INCHES NOMINAL IN
surface_treatmentPLASTIC CASE
housing_bore_diameter6.623 INCHES NOMINAL IN
sealing_element_styleANGULAR-OPPOSED
accommodated_shaft_diameter5.000 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed3600 FEET PER MINUTE FT
NSN5330-01-092-1007
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5330PL0702415 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.906 INCHES NOMINAL IN
•
CASE STYLE: RECESSED
•
SEALING ELEMENT STYLE: ANGULAR-OPPOSED
•
SURFACE TREATMENT: PLASTIC CASE
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 3600 FEET PER MINUTE FT
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT B
TECHNICAL CHARACTERISTICS (FLIS)
SEAL WIDTH0.906 INCHES NOMINAL IN
CASE STYLERECESSED
SEALING ELEMENT STYLEANGULAR-OPPOSED
SURFACE TREATMENTPLASTIC CASE
ACCOMMODATED SHAFT MAXIMUM RATED SPEED3600 FEET PER MINUTE FT
MATERIALRUBBER SYNTHETIC SEALING ELEMENT B
MATERIALRUBBER SYNTHETIC SEALING ELEMENT A
MATERIALSTEEL CASE
HOUSING BORE DIAMETER6.623 INCHES NOMINAL IN
ACCOMMODATED SHAFT DIAMETER5.000 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
50167Interchangeable
interchangeable cross-reference
interchangeable
6699-4Interchangeable
interchangeable cross-reference
interchangeable
A71219Interchangeable
interchangeable cross-reference
interchangeable
A71219-4Interchangeable
interchangeable cross-reference
interchangeable
475-2000-519204PC54-57Interchangeable
interchangeable cross-reference
interchangeable
37953PC54-57Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5330PL0702415?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5330PL0702415?
5330PL0702415 is a SEAL,PLAIN ENCASED.
What parts can replace 5330PL0702415?
There are 11 known substitutes for 5330PL0702415: 50167, 6699-4, A71219 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5330PL0702415?
5330PL0702415 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-092-1007. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5330PL0702415

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026