PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5330PL0658781
5330PL0658781 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 6061 AND RUBBER FLUOROSILICONE CLASS FQ OVERALL, hole_diameter: 0.344 INCHES MINIMUM AND 0.352 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 3.220 INCHES MINIMUM AND 3.540 INCHES MAXIMUM IN, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL OVERALL, style_designator: NON-CIRCULAR, aperture_diameter: 2.380 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-146-7067, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5330PL0658781
NSN: 5330-00-146-7067
FSC: 5330
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
materialALUMINUM ALLOY 6061 AND RUBBER FLUOROSILICONE CLASS FQ OVERALL
hole_diameter0.344 INCHES MINIMUM AND 0.352 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
overall_width3.220 INCHES MINIMUM AND 3.540 INCHES MAXIMUM IN
hardness_rating70.0 SHORE DUROMETER A NOMINAL OVERALL
style_designatorNON-CIRCULAR
aperture_diameter2.380 INCHES NOMINAL IN
surface_treatmentANODIZE OVERALL
bolt_hole_quantity4
gage_ring_thickness0.080 INCHES NOMINAL IN
bolt_circle_diameter2.700 INCHES NOMINAL IN
elongation_percentage125 MAXIMUM
outside_corner_radius0.420 INCHES NOMINAL IN
NSN5330-00-146-7067
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5330PL0658781 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: ALUMINUM ALLOY 6061 AND RUBBER FLUOROSILICONE CLASS FQ OVERALL
•
HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: METAL AND SYNTHETIC RUBBER
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
SURFACE TREATMENT: ANODIZE OVERALL
•
BOLT CIRCLE DIAMETER: 2.700 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NON-CIRCULAR
•
APERTURE DIAMETER: 2.380 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALALUMINUM ALLOY 6061 AND RUBBER FLUOROSILICONE CLASS FQ OVERALL
HARDNESS RATING70.0 SHORE DUROMETER A NOMINAL OVERALL
CROSS-SECTIONAL SHAPE STYLEMETAL AND SYNTHETIC RUBBER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTANODIZE OVERALL
BOLT CIRCLE DIAMETER2.700 INCHES NOMINAL IN
STYLE DESIGNATORNON-CIRCULAR
APERTURE DIAMETER2.380 INCHES NOMINAL IN
GAGE RING THICKNESS0.080 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.120 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
60307Interchangeable
interchangeable cross-reference
interchangeable
94501Interchangeable
interchangeable cross-reference
interchangeable
40356Interchangeable
interchangeable cross-reference
interchangeable
AMS-QQ-A-200/11Interchangeable
interchangeable cross-reference
interchangeable
10134-1602Interchangeable
interchangeable cross-reference
interchangeable
2-1297Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5330PL0658781?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5330PL0658781?
5330PL0658781 is a GASKET.
What parts can replace 5330PL0658781?
There are 21 known substitutes for 5330PL0658781: 60307, 94501, 40356 and 18 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5330PL0658781?
5330PL0658781 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-146-7067. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5330PL0658781

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026