PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5330PL0633750
5330PL0633750 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: PLASTIC OVERALL, outside_diameter: 0.367 INCHES NOMINAL IN, style_designator: CIRCULAR, aperture_diameter: 0.266 INCHES NOMINAL IN, cross-sectional_thickness: 0.021 INCHES NOMINAL IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-008-2166, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5330PL0633750
NSN: 5330-00-008-2166
FSC: 5330
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
materialPLASTIC OVERALL
outside_diameter0.367 INCHES NOMINAL IN
style_designatorCIRCULAR
aperture_diameter0.266 INCHES NOMINAL IN
cross-sectional_thickness0.021 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-00-008-2166
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5330PL0633750 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
APERTURE DIAMETER: 0.266 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 0.367 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
CROSS-SECTIONAL THICKNESS: 0.021 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CIRCULAR
•
MATERIAL: PLASTIC OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
APERTURE DIAMETER0.266 INCHES NOMINAL IN
OUTSIDE DIAMETER0.367 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
CROSS-SECTIONAL THICKNESS0.021 INCHES NOMINAL IN
STYLE DESIGNATORCIRCULAR
MATERIALPLASTIC OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
92071Interchangeable
interchangeable cross-reference
interchangeable
D8929-25A336Interchangeable
interchangeable cross-reference
interchangeable
H9207-1Interchangeable
interchangeable cross-reference
interchangeable
90977Interchangeable
interchangeable cross-reference
interchangeable
037356KInterchangeable
interchangeable cross-reference
interchangeable
92071-1028Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5330PL0633750?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5330PL0633750?
5330PL0633750 is a GASKET.
What parts can replace 5330PL0633750?
There are 6 known substitutes for 5330PL0633750: 92071, D8929-25A336, H9207-1 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5330PL0633750?
5330PL0633750 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-008-2166. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5330PL0633750

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026