PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5330007929849
5330007929849 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: SQUARE, seal_width: 0.296 INCHES MINIMUM AND 0.328 INCHES MAXIMUM IN, housing_bore_diameter: 2.124 INCHES MINIMUM AND 2.126 INCHES MAXIMUM IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 1.594 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-792-9849, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5330007929849
NSN: 5330-00-792-9849
FSC: 5330
CAGE: SCY13 — E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE
SPECIFICATIONS
materialSTEEL CASE
case_styleSQUARE
seal_width0.296 INCHES MINIMUM AND 0.328 INCHES MAXIMUM IN
housing_bore_diameter2.124 INCHES MINIMUM AND 2.126 INCHES MAXIMUM IN
sealing_element_styleANGULAR
accommodated_shaft_diameter1.594 INCHES NOMINAL IN
NSN5330-00-792-9849
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5330007929849 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.296 INCHES MINIMUM AND 0.328 INCHES MAXIMUM IN
•
HOUSING BORE DIAMETER: 2.124 INCHES MINIMUM AND 2.126 INCHES MAXIMUM IN
•
MATERIAL: STEEL CASE
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT DIAMETER: 1.594 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: ANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
SEAL WIDTH0.296 INCHES MINIMUM AND 0.328 INCHES MAXIMUM IN
HOUSING BORE DIAMETER2.124 INCHES MINIMUM AND 2.126 INCHES MAXIMUM IN
MATERIALSTEEL CASE
CASE STYLESQUARE
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
ACCOMMODATED SHAFT DIAMETER1.594 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
637539Interchangeable
interchangeable cross-reference
interchangeable
799122Interchangeable
interchangeable cross-reference
interchangeable
14CInterchangeable
interchangeable cross-reference
interchangeable
92103Interchangeable
interchangeable cross-reference
interchangeable
Z3520Interchangeable
interchangeable cross-reference
interchangeable
33-109Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5330007929849?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5330007929849?
5330007929849 is a SEAL,PLAIN ENCASED.
What parts can replace 5330007929849?
There are 13 known substitutes for 5330007929849: 637539, 799122, 14C and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5330007929849?
5330007929849 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-792-9849. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5330007929849

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026