PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5330007882524
5330007882524 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: PLASTIC SEALING ELEMENT, case_style: SQUARE, seal_width: 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN, temp_rating: 300.0 FAHRENHEIT DEGF, outside_diameter: 3.628 INCHES NOMINAL IN, surface_treatment: PLASTIC CASE. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-788-2524, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5330007882524
NSN: 5330-00-788-2524
FSC: 5330
CAGE: A00AM — E.C.A ETABLISSEMENT CENTRAL DES APPROVISIONNEMENTS DES FORCES ARMEES ROYALES
SPECIFICATIONS
materialPLASTIC SEALING ELEMENT
case_styleSQUARE
seal_width0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
temp_rating300.0 FAHRENHEIT DEGF
outside_diameter3.628 INCHES NOMINAL IN
surface_treatmentPLASTIC CASE
housing_bore_diameter3.623 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter2.563 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed3600 FEET PER MINUTE FT
NSN5330-00-788-2524
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5330007882524 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 3.628 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 3.623 INCHES NOMINAL IN
•
CASE STYLE: SQUARE
•
SEALING ELEMENT STYLE: ANGULAR
•
SURFACE TREATMENT: PLASTIC CASE
•
ACCOMMODATED SHAFT DIAMETER: 2.563 INCHES NOMINAL IN
•
MATERIAL: PLASTIC SEALING ELEMENT
TECHNICAL CHARACTERISTICS (FLIS)
SEAL WIDTH0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
OUTSIDE DIAMETER3.628 INCHES NOMINAL IN
HOUSING BORE DIAMETER3.623 INCHES NOMINAL IN
CASE STYLESQUARE
SEALING ELEMENT STYLEANGULAR
SURFACE TREATMENTPLASTIC CASE
ACCOMMODATED SHAFT DIAMETER2.563 INCHES NOMINAL IN
MATERIALPLASTIC SEALING ELEMENT
TEMP RATING300.0 FAHRENHEIT DEGF
ACCOMMODATED SHAFT MAXIMUM RATED SPEED3600 FEET PER MINUTE FT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
25661Interchangeable
interchangeable cross-reference
interchangeable
SW661Interchangeable
interchangeable cross-reference
interchangeable
01900S2DInterchangeable
interchangeable cross-reference
interchangeable
120 1-1/16Interchangeable
interchangeable cross-reference
interchangeable
R51Interchangeable
interchangeable cross-reference
interchangeable
404Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5330007882524?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5330007882524?
5330007882524 is a SEAL,PLAIN ENCASED.
What parts can replace 5330007882524?
There are 11 known substitutes for 5330007882524: 25661, SW661, 01900S2D and 8 more. Substitute compatibility should be verified for your specific system.
Is 5330007882524 still available?
5330007882524 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5330007882524

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026