The Retainer,packing, cataloged under National Stock Number 5330-00-705-6667, is classified within Federal Supply Class 5330 (Packing and Gasket Materials) of the Hardware and Abrasives group. The manufacturer of record is U S Army Tank Automotive Command Amsta-Im-Mm. Government technical data includes 5 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5330-00-705-6667 |
| Primary Part Number | 7056667 |
| Item Name | Retainer,packing |
| FSC / FSG | 5330 / 53 — Packing and Gasket Materials |
| Manufacturer | U S Army Tank Automotive Command Amsta-Im-Mm |
| Status | ACTIVE |
| Cross-Sectional Height | 0.332 INCHES MINIMUM AND 0.337 INCHES MAXIMUM IN |
| Flanged Body Outside Diameter | 0.906 INCHES NOMINAL IN |
| Peripheral Diameter | 1.109 INCHES NOMINAL IN |
| Center Hole Diameter | 0.625 INCHES MINIMUM AND 0.630 INCHES MAXIMUM IN |
| Material | ALUMINUM ALLOY 2024 OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 7056667 PRIMARY | U S Army Tank Automotive Command Amsta-Im-Mm (USA) |
| Reference | Meaning |
|---|---|
| 5330007056667 | 5/9 Secondary reference E.c.a Etablissement Centrald'approvisionnement Des Forces Armee |
NSN 5330-00-705-6667 is a Retainer,packing, manufactured by U S Army Tank Automotive Command Amsta-Im-Mm, classified under FSC 5330, Packing and Gasket Materials. Status: active.
NSN 5330-00-705-6667 has 1 manufacturer part number on file: 7056667 (U S Army Tank Automotive Command Amsta-Im-Mm).
Key specifications for 7056667: Cross-Sectional Height: 0.332 INCHES MINIMUM AND 0.337 INCHES MAXIMUM IN; Flanged Body Outside Diameter: 0.906 INCHES NOMINAL IN; Peripheral Diameter: 1.109 INCHES NOMINAL IN; Center Hole Diameter: 0.625 INCHES MINIMUM AND 0.630 INCHES MAXIMUM IN. 5 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.