PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5330006783225
5330006783225 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN is a the manufacturer industrial component. Key specifications include material: STEEL SPRING, seal_width: 0.575 INCHES MINIMUM AND 0.605 INCHES MAXIMUM IN, construction: SPLIT, housing_bore_diameter: 5.250 INCHES NOMINAL IN, accommodated_shaft_diameter: 4.250 INCHES NOMINAL IN, cross-sectional_shape_style: SINGLE LIP. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-678-3225, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5330006783225
NSN: 5330-00-678-3225
FSC: 5330
CAGE: SCY13 — E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE
SPECIFICATIONS
materialSTEEL SPRING
seal_width0.575 INCHES MINIMUM AND 0.605 INCHES MAXIMUM IN
constructionSPLIT
housing_bore_diameter5.250 INCHES NOMINAL IN
accommodated_shaft_diameter4.250 INCHES NOMINAL IN
cross-sectional_shape_styleSINGLE LIP
nondefinitive_spec/std_data1 TYPE AND 2 CLASS
NSN5330-00-678-3225
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5330006783225 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
•
ACCOMMODATED SHAFT DIAMETER: 4.250 INCHES NOMINAL IN
•
CONSTRUCTION: SPLIT
•
SEAL WIDTH: 0.575 INCHES MINIMUM AND 0.605 INCHES MAXIMUM IN
•
HOUSING BORE DIAMETER: 5.250 INCHES NOMINAL IN
•
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 2 CLASS
•
CROSS-SECTIONAL SHAPE STYLE: SINGLE LIP
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
ACCOMMODATED SHAFT DIAMETER4.250 INCHES NOMINAL IN
CONSTRUCTIONSPLIT
SEAL WIDTH0.575 INCHES MINIMUM AND 0.605 INCHES MAXIMUM IN
HOUSING BORE DIAMETER5.250 INCHES NOMINAL IN
NONDEFINITIVE SPEC/STD DATA1 TYPE AND 2 CLASS
MATERIALSTEEL SPRING
CROSS-SECTIONAL SHAPE STYLESINGLE LIP
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
303356Interchangeable
interchangeable cross-reference
interchangeable
10887434Interchangeable
interchangeable cross-reference
interchangeable
TYPEICLASS2Interchangeable
interchangeable cross-reference
interchangeable
MILS45005Interchangeable
interchangeable cross-reference
interchangeable
10947340-2Interchangeable
interchangeable cross-reference
interchangeable
A-A-52524Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5330006783225?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5330006783225?
5330006783225 is a SEAL,PLAIN.
What parts can replace 5330006783225?
There are 15 known substitutes for 5330006783225: 303356, 10887434, TYPEICLASS2 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5330006783225?
5330006783225 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-678-3225. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5330006783225

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026