PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5330006296340
5330006296340 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include peripheral_diameter: 2.220 INCHES NOMINAL IN, body_recess_diameter: 1.280 INCHES NOMINAL IN, center_hole_diameter: 0.748 INCHES MINIMUM AND 0.753 INCHES MAXIMUM IN, cross-sectional_height: 0.620 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-629-6340, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5330006296340
NSN: 5330-00-629-6340
FSC: 5330
CAGE: A00AM — E.C.A ETABLISSEMENT CENTRAL DES APPROVISIONNEMENTS DES FORCES ARMEES ROYALES
SPECIFICATIONS
peripheral_diameter2.220 INCHES NOMINAL IN
body_recess_diameter1.280 INCHES NOMINAL IN
center_hole_diameter0.748 INCHES MINIMUM AND 0.753 INCHES MAXIMUM IN
cross-sectional_height0.620 INCHES NOMINAL IN
NSN5330-00-629-6340
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5330006296340 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PERIPHERAL DIAMETER: 2.220 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 0.748 INCHES MINIMUM AND 0.753 INCHES MAXIMUM IN
•
BODY RECESS DIAMETER: 1.280 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.620 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
PERIPHERAL DIAMETER2.220 INCHES NOMINAL IN
CENTER HOLE DIAMETER0.748 INCHES MINIMUM AND 0.753 INCHES MAXIMUM IN
BODY RECESS DIAMETER1.280 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.620 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
9229Interchangeable
interchangeable cross-reference
interchangeable
33-238Interchangeable
interchangeable cross-reference
interchangeable
5187309Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5330006296340?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5330006296340?
5330006296340 is a RETAINER,PACKING.
What parts can replace 5330006296340?
There are 3 known substitutes for 5330006296340: 9229, 33-238, 5187309. Substitute compatibility should be verified for your specific system.
What is the NSN for 5330006296340?
5330006296340 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-629-6340. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5330006296340

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026