PartsTable
Technical Data Sheet

5330006182267 — Technical Data Sheet

✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, outside_diameter: 6.973 INCHES MINIMUM AND 7.077 INCHES MAXIMUM IN, center_hole_diameter: 6.452 INCHES MINIMUM AND 6.498 INCHES MAXIMUM IN, cross-sectional_height: 0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System under NSN 5331-00-618-2267, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5330006182267
NSN: 5331-00-618-2267
FSC: 5331 — O-RING
CAGE: A00AM — E.C.A ETABLISSEMENT CENTRAL DES APPROVISIONNEMENTS DES FORCES ARMEES ROYALES
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
outside_diameter6.973 INCHES MINIMUM AND 7.077 INCHES MAXIMUM IN
center_hole_diameter6.452 INCHES MINIMUM AND 6.498 INCHES MAXIMUM IN
cross-sectional_height0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
NSN5331-00-618-2267
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5330006182267 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 6.452 INCHES MINIMUM AND 6.498 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
•
CROSS-SECTIONAL HEIGHT: 0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 6.973 INCHES MINIMUM AND 7.077 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
CENTER HOLE DIAMETER6.452 INCHES MINIMUM AND 6.498 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
CROSS-SECTIONAL HEIGHT0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
OUTSIDE DIAMETER6.973 INCHES MINIMUM AND 7.077 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
182066AInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
182066InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
2594InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
182066-3011InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
284027-0002InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
SR 832-75-439InterchangeableGOVERNMENT REGISTRY
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLEDGOVERNMENT REGISTRY
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5330006182267?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5330006182267?
5330006182267 is a O-RING.
What parts can replace 5330006182267?
There are 15 known substitutes for 5330006182267: 182066A, 182066, 2594 and 12 more. Substitute compatibility should be verified for your specific system.
Is 5330006182267 still available?
5330006182267 is currently cancelled.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5330006182267