PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5330002915787
5330002915787 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include hardness_rating: 45.0 SHORE DUROMETER A MINIMUM AND 55.0 SHORE DUROMETER A MAXIMUM OVERALL, outside_diameter: 1.109 INCHES MINIMUM AND 1.125 INCHES MAXIMUM IN, style_designator: CIRCULAR, aperture_diameter: 0.828 INCHES MINIMUM AND 0.860 INCHES MAXIMUM IN, cross-sectional_thickness: 0.062 INCHES NOMINAL IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-291-5787, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5330002915787
NSN: 5330-00-291-5787
FSC: 5330
CAGE: SCY13 — E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OR RUBBER POLYESTER URETHANE CLASS AU OR RUBBER POLYETHER URETHANE CLASS EU OVERALL
hardness_rating45.0 SHORE DUROMETER A MINIMUM AND 55.0 SHORE DUROMETER A MAXIMUM OVERALL
outside_diameter1.109 INCHES MINIMUM AND 1.125 INCHES MAXIMUM IN
style_designatorCIRCULAR
aperture_diameter0.828 INCHES MINIMUM AND 0.860 INCHES MAXIMUM IN
cross-sectional_thickness0.062 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationASTM D2000 GRADE 5BG515ABE3F1 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-291-5787
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5330002915787 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 1.109 INCHES MINIMUM AND 1.125 INCHES MAXIMUM IN
•
CROSS-SECTIONAL THICKNESS: 0.062 INCHES NOMINAL IN
•
HARDNESS RATING: 45.0 SHORE DUROMETER A MINIMUM AND 55.0 SHORE DUROMETER A MAXIMUM OVERALL
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OR RUBBER POLYESTER URETHANE CLASS AU OR RUBBER POLYETHER URETHANE CLASS EU OVERALL
•
STYLE DESIGNATOR: CIRCULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM D2000 GRADE 5BG515ABE3F1 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
APERTURE DIAMETER: 0.828 INCHES MINIMUM AND 0.860 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER1.109 INCHES MINIMUM AND 1.125 INCHES MAXIMUM IN
CROSS-SECTIONAL THICKNESS0.062 INCHES NOMINAL IN
HARDNESS RATING45.0 SHORE DUROMETER A MINIMUM AND 55.0 SHORE DUROMETER A MAXIMUM OVERALL
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OR RUBBER POLYESTER URETHANE CLASS AU OR RUBBER POLYETHER URETHANE CLASS EU OVERALL
STYLE DESIGNATORCIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATIONASTM D2000 GRADE 5BG515ABE3F1 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
APERTURE DIAMETER0.828 INCHES MINIMUM AND 0.860 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
ASTM-D2000-01Interchangeable
interchangeable cross-reference
interchangeable
MILR3065GRADERS405ABEFInterchangeable
interchangeable cross-reference
interchangeable
MIL-STD-417AInterchangeable
interchangeable cross-reference
interchangeable
1866-2MCV70Interchangeable
interchangeable cross-reference
interchangeable
ASTM D2000-03AInterchangeable
interchangeable cross-reference
interchangeable
MILR3065Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5330002915787?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5330002915787?
5330002915787 is a GASKET.
What parts can replace 5330002915787?
There are 17 known substitutes for 5330002915787: ASTM-D2000-01, MILR3065GRADERS405ABEF, MIL-STD-417A and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5330002915787?
5330002915787 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-291-5787. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5330002915787

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026