PartsTable
Technical Data Sheet
PartsTable / O-RING / 5330001661062
5330001661062 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, temp_rating: -20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF, hardness_rating: 75.0 SHORE DUROMETER A NOMINAL, outside_diameter: 0.755 INCHES NOMINAL IN, center_hole_diameter: 0.542 INCHES MINIMUM AND 0.556 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-166-1062, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5330001661062
NSN: 5331-00-166-1062
FSC: 5331 — O-RING
CAGE: SCY13 — E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM
temp_rating-20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
hardness_rating75.0 SHORE DUROMETER A NOMINAL
outside_diameter0.755 INCHES NOMINAL IN
center_hole_diameter0.542 INCHES MINIMUM AND 0.556 INCHES MAXIMUM IN
elongation_percentage125 MAXIMUM
cross-sectional_height0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
NSN5331-00-166-1062
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5330001661062 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
•
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL
•
OUTSIDE DIAMETER: 0.755 INCHES NOMINAL IN
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
•
CENTER HOLE DIAMETER: 0.542 INCHES MINIMUM AND 0.556 INCHES MAXIMUM IN
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
TEMP RATING-20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL
OUTSIDE DIAMETER0.755 INCHES NOMINAL IN
MATERIALRUBBER FLUOROCARBON CLASS FPM
CENTER HOLE DIAMETER0.542 INCHES MINIMUM AND 0.556 INCHES MAXIMUM IN
ELONGATION PERCENTAGE125 MAXIMUM
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
LS5041-28Interchangeable
interchangeable cross-reference
interchangeable
5330PL1958988Interchangeable
interchangeable cross-reference
interchangeable
NAS1593-113Interchangeable
interchangeable cross-reference
interchangeable
MS9388-113Interchangeable
interchangeable cross-reference
interchangeable
342433Interchangeable
interchangeable cross-reference
interchangeable
Z00.N7425068113Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5330001661062?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5330001661062?
5330001661062 is a O-RING.
What parts can replace 5330001661062?
There are 24 known substitutes for 5330001661062: LS5041-28, 5330PL1958988, NAS1593-113 and 21 more. Substitute compatibility should be verified for your specific system.
Is 5330001661062 still available?
5330001661062 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5330001661062

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026