PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5330001648691
5330001648691 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT, case_style: RECESSED, seal_width: 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN, temp_rating: -65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF, special_features: RESINEOUS OR ELASTOMERIC COATING, housing_bore_diameter: 0.748 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-164-8691, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5330001648691
NSN: 5330-00-164-8691
FSC: 5330
CAGE: A00AM — E.C.A ETABLISSEMENT CENTRAL DES APPROVISIONNEMENTS DES FORCES ARMEES ROYALES
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT
case_styleRECESSED
seal_width0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
temp_rating-65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
special_featuresRESINEOUS OR ELASTOMERIC COATING
housing_bore_diameter0.748 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
sealing_element_styleANGULAR
accommodated_shaft_diameter0.312 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed1000 FEET PER MINUTE FT
NSN5330-00-164-8691
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5330001648691 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ACCOMMODATED SHAFT DIAMETER: 0.312 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 0.748 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
•
SEALING ELEMENT STYLE: ANGULAR
•
SEAL WIDTH: 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
•
MATERIAL: STEEL CASE
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 1000 FEET PER MINUTE FT
•
TEMP RATING: -65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
TECHNICAL CHARACTERISTICS (FLIS)
ACCOMMODATED SHAFT DIAMETER0.312 INCHES NOMINAL IN
HOUSING BORE DIAMETER0.748 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
SEALING ELEMENT STYLEANGULAR
SEAL WIDTH0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
MATERIALSTEEL CASE
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
ACCOMMODATED SHAFT MAXIMUM RATED SPEED1000 FEET PER MINUTE FT
TEMP RATING-65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
CASE STYLERECESSED
SPECIAL FEATURESRESINEOUS OR ELASTOMERIC COATING
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
956-4704Interchangeable
interchangeable cross-reference
interchangeable
AI-6Interchangeable
interchangeable cross-reference
interchangeable
LS-103RInterchangeable
interchangeable cross-reference
interchangeable
20093Interchangeable
interchangeable cross-reference
interchangeable
89F1015Interchangeable
interchangeable cross-reference
interchangeable
RES 002M20 010% 0,50W AG04X010Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5330001648691?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5330001648691?
5330001648691 is a SEAL,PLAIN ENCASED.
What parts can replace 5330001648691?
There are 18 known substitutes for 5330001648691: 956-4704, AI-6, LS-103R and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5330001648691?
5330001648691 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-164-8691. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5330001648691

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026