PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5330000835406
5330000835406 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include end_radius: 0.800 INCHES NOMINAL IN, hole_diameter: 0.400 INCHES MINIMUM AND 0.420 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 1.480 INCHES NOMINAL IN, overall_length: 4.950 INCHES NOMINAL IN, cross-sectional_thickness: 0.062 INCHES NOMINAL IN, bolt_hole_centerline_to_nearest_edge_distance: 0.740 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-083-5406, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5330000835406
NSN: 5330-00-083-5406
FSC: 5330
CAGE: A00AM — E.C.A ETABLISSEMENT CENTRAL DES APPROVISIONNEMENTS DES FORCES ARMEES ROYALES
SPECIFICATIONS
end_radius0.800 INCHES NOMINAL IN
hole_diameter0.400 INCHES MINIMUM AND 0.420 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
overall_width1.480 INCHES NOMINAL IN
overall_length4.950 INCHES NOMINAL IN
cross-sectional_thickness0.062 INCHES NOMINAL IN
bolt_hole_centerline_to_nearest_edge_distance0.740 INCHES NOMINAL IN
center_to_center_distance_between_bolt_holes_along_length4.070 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
NSN5330-00-083-5406
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5330000835406 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOLE DIAMETER: 0.400 INCHES MINIMUM AND 0.420 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
•
END RADIUS: 0.800 INCHES NOMINAL IN
•
BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE: 0.740 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 4.070 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
CROSS-SECTIONAL THICKNESS: 0.062 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
HOLE DIAMETER0.400 INCHES MINIMUM AND 0.420 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
END RADIUS0.800 INCHES NOMINAL IN
BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE0.740 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH4.070 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OVERALL WIDTH1.480 INCHES NOMINAL IN
OVERALL LENGTH4.950 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.062 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
C0688-3Interchangeable
interchangeable cross-reference
interchangeable
33679Interchangeable
interchangeable cross-reference
interchangeable
41131Interchangeable
interchangeable cross-reference
interchangeable
C0695-3Interchangeable
interchangeable cross-reference
interchangeable
5211Interchangeable
interchangeable cross-reference
interchangeable
0336790007Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5330000835406?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5330000835406?
5330000835406 is a GASKET.
What parts can replace 5330000835406?
There are 10 known substitutes for 5330000835406: C0688-3, 33679, 41131 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5330000835406?
5330000835406 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-083-5406. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5330000835406

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026