PartsTable
Technical Data Sheet
5330-215000 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT, case_style: SQUARE, seal_width: 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN, outside_diameter: 2.754 INCHES NOMINAL IN, surface_treatment: PLASTIC CASE, housing_bore_diameter: 2.750 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-285-8279, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5330-215000
NSN: 5330-00-285-8279
FSC: 5330
CAGE: 81336 — CHIEF OF ENGINEERS DEPT OF ARMY (USA)
SPECIFICATIONS
materialLEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
case_styleSQUARE
seal_width0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
outside_diameter2.754 INCHES NOMINAL IN
surface_treatmentPLASTIC CASE
housing_bore_diameter2.750 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter1.875 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-285-8279
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5330-215000 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
SEALING ELEMENT STYLE: ANGULAR
OUTSIDE DIAMETER: 2.754 INCHES NOMINAL IN
ACCOMMODATED SHAFT DIAMETER: 1.875 INCHES NOMINAL IN
MATERIAL: LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
CASE STYLE: SQUARE
SURFACE TREATMENT: PLASTIC CASE
HOUSING BORE DIAMETER: 2.750 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
SEALING ELEMENT STYLEANGULAR
OUTSIDE DIAMETER2.754 INCHES NOMINAL IN
ACCOMMODATED SHAFT DIAMETER1.875 INCHES NOMINAL IN
MATERIALLEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
CASE STYLESQUARE
SURFACE TREATMENTPLASTIC CASE
HOUSING BORE DIAMETER2.750 INCHES NOMINAL IN
SEAL WIDTH0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
3M348L3Interchangeable
interchangeable cross-reference
interchangeable
53488W-1032Interchangeable
interchangeable cross-reference
interchangeable
K19701P3Interchangeable
interchangeable cross-reference
interchangeable
18650Interchangeable
interchangeable cross-reference
interchangeable
12126-SC1Interchangeable
interchangeable cross-reference
interchangeable
18657Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5330-215000?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5330-215000?
5330-215000 is a SEAL,PLAIN ENCASED.
What parts can replace 5330-215000?
There are 21 known substitutes for 5330-215000: 3M348L3, 53488W-1032, K19701P3 and 18 more. Substitute compatibility should be verified for your specific system.
Is 5330-215000 still available?
5330-215000 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5330-215000