PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5330-086000
5330-086000 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: SQUARE, seal_width: 0.359 INCHES MINIMUM AND 0.422 INCHES MAXIMUM IN, housing_bore_diameter: 1.499 INCHES NOMINAL IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 1.000 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-291-9637, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5330-086000
NSN: 5330-00-291-9637
FSC: 5330
CAGE: 81336 — CHIEF OF ENGINEERS DEPT OF ARMY (USA)
SPECIFICATIONS
materialSTEEL CASE
case_styleSQUARE
seal_width0.359 INCHES MINIMUM AND 0.422 INCHES MAXIMUM IN
housing_bore_diameter1.499 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter1.000 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-291-9637
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5330-086000 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOUSING BORE DIAMETER: 1.499 INCHES NOMINAL IN
•
SEAL WIDTH: 0.359 INCHES MINIMUM AND 0.422 INCHES MAXIMUM IN
•
SEALING ELEMENT STYLE: ANGULAR
•
ACCOMMODATED SHAFT DIAMETER: 1.000 INCHES NOMINAL IN
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
MATERIAL: STEEL CASE
TECHNICAL CHARACTERISTICS (FLIS)
HOUSING BORE DIAMETER1.499 INCHES NOMINAL IN
SEAL WIDTH0.359 INCHES MINIMUM AND 0.422 INCHES MAXIMUM IN
SEALING ELEMENT STYLEANGULAR
ACCOMMODATED SHAFT DIAMETER1.000 INCHES NOMINAL IN
CASE STYLESQUARE
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
MATERIALSTEEL CASE
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
60245Interchangeable
interchangeable cross-reference
interchangeable
RW30G161Interchangeable
interchangeable cross-reference
interchangeable
522621Interchangeable
interchangeable cross-reference
interchangeable
MILR26Interchangeable
interchangeable cross-reference
interchangeable
8R5Interchangeable
interchangeable cross-reference
interchangeable
101-03-10-210Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5330-086000?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5330-086000?
5330-086000 is a SEAL,PLAIN ENCASED.
What parts can replace 5330-086000?
There are 21 known substitutes for 5330-086000: 60245, RW30G161, 522621 and 18 more. Substitute compatibility should be verified for your specific system.
Is 5330-086000 still available?
5330-086000 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5330-086000

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026